Virtual Gun Show [updated 10 OCT]

[Story]

Prices at FTF vic Plymouth Meeting Mall. Shipping on your dime, vis USPS.
For ammunition, check here https://forum.pafoa.org/showthread.p...26#post4744726

Two M1917 Browning ammunition boxes, repainted with canvas handles and a gallon ziplock of links - $100

1903 straight stock set, needs some work. No stampings found. - $125



In response to your many questions, this package includes stock (161), handguard (84), buttplate (50) w/ two screws, buttswivel (base only) w/ two screws (58/80), upper band, parking removed (71) & a stacking swivel retaining spring.



1903 Springfield Rear Sight $45.


M9 flash hider for the M3 Greasegun (but I suppose they could be clamped to any .45 concoction you're inclined to hide flashes on) - $40
ONE available


Used 1911 parts - pimp your TISAS!
Pachmyer wraparound grips, still exuding grippiness. Two available, $20 each
Stripped 1911A1 mainspring housings, steel - one crosshatched, the other not. $15 each
Colt Grips - Government / Full-Size - Rubber - Rampant Colt Logo - Abide Armory <- one like that, $5
Faux ivory grips - dye them a funky color? $10
One long tail grip safety set up for a commander hammer, the other looks normal - $25 each
One plastic trigger with aluminum bar - $5


Ron Strobel 1911 Front Sight tool (so you won't have to butcher around like SOME PEOPLE here). Removed from packaging, fondled but never used.
Out of stock at the usual places (https://www.midwayusa.com/product/1007347327) $75


PO8 Luger Emotional Support Package [SARCO sourced] - two repro mags, one with aluminum follower and baseplate. One wooden baseplate (never got a replacement follower). One repro leather two-mag pouch that I oiled so the mags actually fit and the flap can close.
One stop shopping for $110


40 Turkish 8mm brass stipper clips, $60.
Compare at https://www.sarcoinc.com/turkish-mauser-stripper-clip/

SKS handguard, used but cleaned. Wood smells like a Yugoslavian cab driver. $25


K98 Bayonet Lug, no markings but nice bluing. $15

Gew98 Lang Vizier rear sight, needs pin (make one from a nail) $45


early Model 1886 Lebel bayonet ("Rosalie") Bayonet w/o scabbard - gone

[Story]

[Story]

Beat the end of summer sale.

[Story]

DPMS XM177 heavy barrel and ban-era 20" 1/9 5.56 AR heavy barrel, unknown maker

1) 1/9 5.56 DPMS XM177 heavy barrel, unfired and test-mounted maybe once.
$150 FTF @ Plymouth Meeting. Discontinued item https://www.midwayusa.com/product/1003459165




2) Ban-era 1/9 5.56 AR heavy barrel
$150 FTF @ Plymouth Meeting. Bore is fine, just going a different direction on this project. Unknown round count.

Actual USPS shipping and the 22" overall length will probably trigger the USPS oversized package fee, so figure $20-25 to mail it.



Unmarked except for the 1/9 5.56 stamping. FSB is neutered (no bayonet lug or sling swivel) and stripped/no front sight assembly.

Muzzle device is secured with a hardened pin, which you get to remove.

[Story]

L1A1 bayonet and scabbard, Australian $100 + shipping [29 June 23]

L1A1 bayonet and scabbard, Australian still in wrap $130 + shipping [29 June 23]

https://i.imgur.com/LXzB3I4.jpg

Well-loved rear sight with Z spring, $50 + shipping [25 JUNE23]
https://i.imgur.com/cfmxZtj.jpg

Australian 2nd pattern (unmarked/serialed) L1A1 flash hider $20+ shipping

L1A1 wood pistol grip, less ice cream tab. Has metric threaded (I think) tab retaining bolt with matching helicoilly insert.
Matt from Ironwood product, IIRC. You do 922r? Great. $50+ shipping

FAL/L1A1 fixed stock DSA stripper clip picatinny top cover - $125

[Story]

M14 bayonet, M8A1 scabbard and utility belt for a skinny guy - $50 + shipping.

LARP your way through the rice fields, in the never ending search for Charlie.

Will trade any of the above or from my shotgun stuff
https://forum.pafoa.org/showthread.php?t=399745

to a fair value for a

2 PIECE DROP IN HANDGUARD QUAD RAIL 12" RIFLE LENGTH (FITS TRIANGLE END CAP)

https://justrails.com/products/2-pie...iangle-end-cap

or

https://www.midwayusa.com/product/1003274510

[Story]

[Story]

All prices are FTF vic Plymouth Meeting Mall.
Shipping? Sure, but that's on you.
Questions or requests for additional pics - ask away.

$100 Remington M11 Barrel #1 - 19" muzzle to breach face, decent bluing, brass bolt (?) front sight
Serial under barrel ring 24286 so *maybe* 1912?

$100 Remington M11 Barrel #2
Just shy of 22" muzzle to breach face, worn finish, no front sight
Serial under barrel ring 122617 so *maybe* 1917?

https://i.imgur.com/OMZXfYE.jpg https://i.imgur.com/oQKpbb4.jpg

$100 12 Gauge Winchester 97 19 1/2" long cylinder bore barrel. 19" long.
Potato grade bore pic illustrates some bumpiness, but quite usable.
Brass roundhead bolt for front sight.

https://i.imgur.com/KlRIla1.jpg https://i.imgur.com/OkWjB1U.jpg https://i.imgur.com/ceok8WJ.jpg

$275 FTF 12g Browning A5 28" made in Belgium
I would suggest to avoid heartache, only purchase this for a pre-WW2 Belgian-made Browning A5. Good candidate to make a Rhodie A8.
*
28" barrel, no issues with the bore or chamber.



NOTE - because of the choke, NOT for slugs



Also marked 'Cockerill Steel'
https://i.imgur.com/mhyD0L2.jpg https://i.imgur.com/hRM2T0k.jpg

Front sight bead missing https://i.imgur.com/35LDSpw.jpg

Early serial number https://i.imgur.com/kbkheGn.jpg

Questions answered
Will this fit a WW2ish Remington Browning A5 and/or Remington Model 11 post-war?
Nope - those have 'dished' cuts at the 10 o'clock position on the barrel extension.
*
What about the pre-WW2 Remington Model 11s? or those St Louis Brownings?
Dunno - the barrel extensions *look* the same but I've never had a Belgian Browning 12 gauge to do the swappy/testy thing.*


$200 12 gauge 22" Browning A5 "made in St Louis" Belgian barrel.
A) It's serialed 204055 * / horizontal I on left side of barrel ring - this would date to the late 1930s.
From the Browning nerds -
Beginning with Serial Number 1 to approximately 228,000. Exact production figures are not available. Year of manufacture on Pre-World War II production is strictly a guess.

Auto-5 Semi-Automatic Shotgun - Browning

B) I do not think 22" is a factory length, but the little brass shotgun ball front sight looks nicely done. Good for making a Riot Gun on a pre-War Browning.


https://i.imgur.com/vOkNEDi.jpg https://i.imgur.com/TijHHaz.jpg https://i.imgur.com/WhWcvjA.jpg https://i.imgur.com/2RGjVD1.jpg

* Inspiration provided at no additional cost.
The Browning A5 12 Gauge - Resurrecting a Legend - Part 1 http://www.majorpandemic.com/2016/04...end-part1.html


$150 12 gauge Remington Sportsman complete fore end (2 +1)


Complete magazine tube w/ follower, spring and funky endcap (sealed unit, came off real easy IIRC), fore end with honest wear and no splits.
Came off a 1948 era SPORTSMAN and has been gathering dust.
Nothing wrong with it, just doesn't fit my needs and probably fits yours.
One of you guys wanting to build a dedicated field gun (2 +1), here ya go.

[Story]