Results 1 to 10 of 23
Thread: Refinishing a Mosin M44
-
April 28th, 2020, 10:59 PM #1
Refinishing a Mosin M44
I fully understand that refinishing older guns generally devalues them. That said, refinishing and already refinished older gun shouldn’t raise too many eyebrows.
When I bought this M44 the original reddish hue was already replaced with a walnut looking stain job. It looked good and was done decently enough but I decided to redo it more for a project than anything else.
It was just a matter of removing the old finish, applying a few coats of Minwax number 225, red mahogany, and then topping it off with a few coats of tru oil. Patience is always key making sure everything is fully dry before taking the next step. I know it may appear too glossy for some but it is to my liking and if I change my mind some triple zero steel wool is already on hand.
Thanks for looking and as always, all comments good or bad are always appreciated, Brian
Last edited by bripro; April 28th, 2020 at 11:03 PM.
DDG-8 "Sine Timore"
-
April 28th, 2020, 11:16 PM #2
Re: Refinishing a Mosin M44
Wow, looks excellent! I'd keep the shine personally - I like it.
-
April 28th, 2020, 11:21 PM #3
Re: Refinishing a Mosin M44
Looks good.
The Russians used Amber shellac in order to get that reddish look.Join the GOA & save $5.00. https://www.gunowners.org/mac-subs-join-goa.htm
-
April 28th, 2020, 11:47 PM #4Grand Member
- Join Date
- Nov 2017
- Location
-
New Tripoli,
Pennsylvania
(Lehigh County) - Posts
- 2,395
- Rep Power
- 21474845
Re: Refinishing a Mosin M44
Sweet looking Boomstick
-
April 29th, 2020, 10:49 AM #5
Re: Refinishing a Mosin M44
Nice job, nothing wrong with that change, it looks better with the more reddish color you used in my opinion.
Illegitimus non carborundum est
-
April 29th, 2020, 11:04 AM #6
Re: Refinishing a Mosin M44
I like it a lot. Similar to what I did to my yugo Mauser 20 years ago.
-
April 29th, 2020, 11:06 AM #7
Re: Refinishing a Mosin M44
Looks great. Nice job. I redid the furniture on my 91/30. Before and after in the pics.
IMG_3528_d1450.JPG
DSCF8282.jpgMember of Zerbe Township Rod & Gun Club.
-
April 29th, 2020, 11:41 PM #8
Re: Refinishing a Mosin M44
Looks good man
My Mosin refinish project didn't come out nearly as niceI'm faster than Doc Holliday (with Novocaine of course)
-
April 30th, 2020, 10:54 AM #9
Re: Refinishing a Mosin M44
Thanks everybody for looking and taking the time to respond. It was somewhat fun bringing it up to par. Definitely a test of patience allowing 24 hours between coats. I’m Thanks everybody for looking and taking the time to respond. It was somewhat fun bringing it up to par. Definitely a test of patience allowing 24 hours between coats.
DDG-8 "Sine Timore"
-
April 30th, 2020, 11:01 AM #10
Similar Threads
-
Gun Refinishing
By Tims67novass in forum GunsmithingReplies: 5Last Post: June 14th, 2010, 01:02 AM -
Scoped Mosin/Scout Mosin/Sporterized Mosin
By Kb! Bob in forum GeneralReplies: 0Last Post: December 21st, 2009, 08:57 PM -
wood refinishing mosin nagant
By Smokeyzep in forum GeneralReplies: 24Last Post: October 14th, 2009, 09:45 AM -
Mosin M39, Mosin M38, Mosin M91 P-27, M1 carbine and Geha shotgun
By wizzegun in forum GeneralReplies: 1Last Post: May 21st, 2009, 10:29 PM -
refinishing a m&p
By 338winmag in forum GeneralReplies: 26Last Post: May 18th, 2009, 08:16 AM
Bookmarks