Results 1 to 10 of 31
-
March 24th, 2010, 10:50 PM #1
Finalized my AR15 pistol build with upgrades
I built this pistol last June and didn't really have the funds to make it look nice until now. Here's the link on how it started (and specs): http://forum.pafoa.org/general-2/633...ng-pistol.html.
Here's is how it is now with:
1. MI flip up front and rear BUIS (excellent addition for a clean look)
2. AIMShot multi-reticle holographic sight (solidly built, excellent economical sight)
3. Tapco SAW grip (not so sure about the feel, but like the look)
4. Single point sling (not sure of the make, but awesome)
5. Knight Armament rail panels (cuts down on the sharp edges and rounded out the look)
You've gotta love the recessed barrel. She runs flawlessly with lots of fire and LOUD!
AlLast edited by mythaeus; March 24th, 2010 at 10:53 PM.
-
March 24th, 2010, 10:57 PM #2
Re: Finalized my AR15 pistol build with upgrades
looks freaking sweeeet
-
March 24th, 2010, 11:02 PM #3Super Member
- Join Date
- Mar 2008
- Location
-
Witless Protection Program,
Wisconsin
- Posts
- 811
- Rep Power
- 2804760
Re: Finalized my AR15 pistol build with upgrades
That's very nice. How about a straight profile shot, with something for size perspective?
-
March 24th, 2010, 11:05 PM #4Banned
- Join Date
- Jan 2010
- Location
-
Philadelphia,
Pennsylvania
(Philadelphia County) - Posts
- 472
- Rep Power
- 0
Re: Finalized my AR15 pistol build with upgrades
Flash hider make and model?
-
March 24th, 2010, 11:09 PM #5
-
March 24th, 2010, 11:16 PM #6
Re: Finalized my AR15 pistol build with upgrades
Looking good Al!!
-
March 25th, 2010, 03:44 AM #7
Re: Finalized my AR15 pistol build with upgrades
Looks great! I checked the other thread and didn't see anything mentioned about the gas system. I have been thinking about doing a pistol build but was concerned about issues with such a short barrel and how to make it cycle well, any tips, tricks or recomendations, or some info about gas tube lenth etc......
Thanks YBThe smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities.
Ayn Rand
-
March 25th, 2010, 07:07 AM #8
Re: Finalized my AR15 pistol build with upgrades
Thanks Mike!
It's just a regular old DI, nothing fancy. I initially used a YHM low profile gas block, which was difficult to tighten up, resulting in some gas leak. I eventually replaced it with a Midwest Industries LP gas block and it's been 100% ever since with every type of ammo, including Wolf. Oh, the barrel is a 7" DPMS Kitty Kat with a 7" gas tube.
Al
-
March 25th, 2010, 08:33 AM #9
-
March 25th, 2010, 10:25 AM #10Senior Member
- Join Date
- Jan 2009
- Location
-
N/A,
Pennsylvania
- Posts
- 402
- Rep Power
- 276446
Re: Finalized my AR15 pistol build with upgrades
Very nice build gotta love the ar15 pistol. I just got finished with mine not that long ago. How is that sight? Also how big is the dot? What buffer tube did u use? Is that a spikes? Here is a link to my pistol
http://forum.pafoa.org/gun-pictures-...15-pistol.htmlLast edited by Normlizer; March 25th, 2010 at 10:59 AM.
Similar Threads
-
First AR15 build
By hertz in forum GeneralReplies: 0Last Post: December 22nd, 2009, 10:18 PM -
Draco AK-47 Pistol w/ upgrades & 15 mags!!!
By mak47 in forum GeneralReplies: 1Last Post: May 7th, 2009, 04:57 PM -
Pistol Upgrades
By Taz in forum GeneralReplies: 29Last Post: September 27th, 2008, 06:53 AM -
The ar15 build...
By Jared89 in forum GeneralReplies: 3Last Post: July 27th, 2008, 10:35 PM -
Want to build my own AR15, where to go?
By nfafan in forum GeneralReplies: 15Last Post: June 4th, 2008, 07:08 AM
Bookmarks