Results 1 to 10 of 14
Thread: M76 Build
-
April 18th, 2010, 08:52 PM #1
M76 Build
Started off with a parts kit from ORF, ORF reciever, and Green Mountain barrel.
After several hours of deburring, fitting of pins, covers, levers, and the bcg, I blasted the receiver clean..
-
April 18th, 2010, 08:54 PM #2
Re: M76 Build
Blued the receiver today...
Then riveted the trigger guard and pistol grip base on...
-
April 18th, 2010, 08:55 PM #3
Re: M76 Build
Tried on some other parts since I'm out of time until next weekend. Will tackle the barrel assembly next week.
-
April 18th, 2010, 09:00 PM #4
Re: M76 Build
Lookin great so far! how much more thicker is the m76 barrel as opposed to the psl barrel?
Gott mit uns
-
April 18th, 2010, 09:10 PM #5
Re: M76 Build
I'll measure my M76 barrel later tonight with calipers, but I don't have a PSL to measure. But I'll tell you, every part on this M76 is beefed up it seems compared to the typical AK variants. I really like the heft of the parts, it should make for a fairly accurate rifle.
-
April 24th, 2010, 12:23 AM #6
Re: M76 Build
Forgot those dimensions, sorry, calipers are not with me right now either.
Got some more done this week. Barrel parts pressed on except for the front sight which I will solder on since it's not quite a perfect press fit.
Got the barrel assembly pressed into the receiver and tonight riveted the scope rail on. (forgot to upload pics) I'm going to headspace it off some ammo with the firing pin and extractor pulled pending I can find some ammo tomorrow.
Where can I find some Wolf Gold or Privi 8mm in the northern york or cumberland county area? Besides corrosive surplus, those more modern ones are the only ones with the correct bullet weight. I checked out three stores tonight and found nothing. The wold and privi will primarily be the ammo I will use before switching to relaoding for that caliber.
-
May 8th, 2010, 12:55 AM #7
Re: M76 Build
I'm just gonna skip right ahead to the final product since there doesnt seem like much interest in the actual build process here. Got some 8mm in last week and it's ready for test firing at this point, which I may try out tomorrow.
With the obligtory bayonet picture turning this thing into a spear.
-
May 8th, 2010, 12:31 PM #8
Re: M76 Build
It is beautiful
Good job.I hope one day I can build a nice rifle like that :]Gott mit uns
-
May 10th, 2010, 02:42 PM #9
-
May 10th, 2010, 02:59 PM #10
Re: M76 Build
very impressive! i didn't know an 8mm AK variant even existed, very cool rifle.
The first vehicles normally on the scene of a crime are ambulances and police cruisers. If you are armed you have a chance to decide who gets transported in which vehicle, if you are not armed then that decision is made for you.
Be prepared, because someone else already is and no one knows their intent except them.
Similar Threads
-
AR Build #3, My "Ultimate" Build
By mythaeus in forum GeneralReplies: 24Last Post: July 12th, 2009, 11:34 PM -
looking for a SxS to build into a SBS in 09
By Mooseman in forum GeneralReplies: 3Last Post: November 10th, 2008, 10:29 PM -
What was your first AR build?
By jcabin in forum GeneralReplies: 8Last Post: November 10th, 2008, 01:03 PM -
Is It possible to build a AR without out a FFL
By Grizz2720 in forum GeneralReplies: 10Last Post: September 8th, 2008, 07:59 AM -
First AR Build - Done.
By Stack in forum GeneralReplies: 15Last Post: March 29th, 2008, 04:40 AM
Bookmarks