Post your AR with pictures here!

[Nate7667]

How are you liking the AR10 shorty?
Was it what you hoped it to be?

I shoot mine more that I shoot my 22" upper. I need to sell that upper.

[Emptymag]

I've got at least three more receivers to build on right now. Need a dmr rig a beater and who knows what else I'll build.

Fuck. So do I, but that's just gonna catch me up to where you are NOW. LOL

I've got two GWACS CAV-15 MKII lowers that need uppers.
One is already slated to be a lightweight build for my wife - the other will likely be the same thing - for me, but maybe not as critical on the lightweight aspect as hers will be. Just a basic, no-frills carbine - light and handy - perhaps a SHTF gun?

I'm also very much considering another pistol build - in 9mm this time.

[NathanB]

How are you liking the AR10 shorty?
Was it what you hoped it to be?

I shoot mine more that I shoot my 22" upper. I need to sell that upper.

I've only had it out once but it was a blast. I really just wanted to make sure I beat the new atf regs.

Fuck. So do I, but that's just gonna catch me up to where you are NOW. LOL

I've got two GWACS CAV-15 MKII lowers that need uppers.
One is already slated to be a lightweight build for my wife - the other will likely be the same thing - for me, but maybe not as critical on the lightweight aspect as hers will be. Just a basic, no-frills carbine - light and handy - perhaps a SHTF gun?

I'm also very much considering another pistol build - in 9mm this time.

I'll probably pick up a few more lowers as just in case pieces. One of them may turn into a 50 Beowulf or 458 socom or something.

[chkrdflg]

My 7.5" 5.56 AR15 I recently finished up

NICE! What kind/build specs on the upper? I just got a 10.5" upper for a pistol build that will look very similar.

[Emptymag]

My 7.5" 5.56 AR15 I recently finished up

Cool.

Before I built mine I went through the AR Pistol photo thread on ARFCOM and quickly realized that 7.5" barreled guns were the ones I was drawn to every time.

Yours looks a lot like mine minus the Shockwave Blade. I put my Primary Arms Micro Red Dot on mine - and I have a 2-point sling on mine, 'cuz... well, I CAN. LOL

[s campbell]

My 7.5" 5.56 AR15 I recently finished up

Aero Precision 1:7 barrel 5.56
KAK slimeline flash can
Spikes Tactical Gas block
Rousch Sports ULS Keymod HandGuard
Toms Tactical upper
Anderson Lower
Standard CH
Bushnell Tr25
DeltaTeamTactical pistol tube
PSA 5.56 nickel Boron BCG
Anderson LPK cut hammer and polished
JP Reduced Power Trigger Spring Kit
MFT Light

[Solaran_X]

Lower is shared between all three upper receivers. It is a Colt M4 LE6920 that is registered as a SBR. Has a LMT SOPMOD stock, CQD end plate, Magpul MIAD pistol grip and Geissele SSA-E trigger.


Mk18 Mod 0 CQB/R upper receiver on registered SBR'd Colt M4 LE6920 lower receiver (10.3")
-Factory Colt M4 LE6920 upper receiver with M4 feed ramps, rebarreled with 10.3" Daniel Defense 1:7 chrome moly barrel
-PRI M84 Gas Buster charging handle w/ Big Miltary latch
-LMT rear BUIS
-Aimpoint Comp M2 w/ Wilcox mount (old ECOS-N)
-KAC M4 RAS
-Surefire M952XM07 weaponlight
-Grip Pod GPS-02
-KAC M4QD
-Colt BCG w/ Crane upgrades
-CQD forward sling point (opposite side of rail)


M4A1 upper receiver on registered SBR'd Colt M4 LE6920 lower receiver (14.5")
-LMT barreled upper receiver with M4 feed ramps and 14.5" LMT 1:7 chrome moly barrel
-PRI M84 Gas Buster charging handle w/ Big Military latch (will arrive next week to replace current PRI M84 Gas Buster charging handle w/ Combat latch)
-KAC 0-300M rear BUIS (full sized, not micro)
-Trijicon TA01NSN ACOG
-KAC M4 RAS
-Surefire M952XM07 weaponlight
-Grip Pod GPS-02
-KAC M4QD
-LMT BCG w/ Crane upgrades
-CQD forward sling point (opposite side of rail)
-Insight AN/PEQ-2A (which unfortunately is no longer 100% operational - the IR pointer died, although the IR flood is still functional)


Mk12 Mod 1 upper receiver on registered SBR'd Colt M4 LE6920 lower receiver (18")
-BCM Mk12 Mod1R-Bravo barreled upper receiver with M4 feed ramps and 18" BCM SS410 1:8 barrel, BCM Mk12 brake and collar and what may be a real Badger Ordnance Mk12 gas block
-PRI M84 Gas Buster w/ Big Military latch (will arrive next week I believe)
-KAC front sight (will arrive next week I believe)
-KAC 200-600M rear sight (will arrive next week I believe)
-Nightforce NXS 2.5-10x24 (will arrive some time in November, its on pre-order through Optics Planet)
-A.R.M.S. #22H scope rings
-KAC M16 Free Floating RAS
-KAC broom handle vertical grip
-Harris S-BR 6-9" bipod (should arrive today)
-A.R.M.S. #32 bipod mount (should arrive today)
-BCM BCG w/ Crane upgrades

Keeping this as close to what the military really used in the 1999-2005 time frame as possible. Some things like the MIAD and Grip Pods were introduced right at the end of my time frame, so they barely make the cut.

[Solaran_X]

~$12,000 worth of Colt M4 LE6920 in one picture.



Still waiting on (paid for and waiting to ship/receive/paperwork) -

- Nightforce NXS 2.5-10x24 for 18" Mk12 Mod 1
- A.R.M.S. Tactical Ring Cap for front A.R.M.S. #22H scope ring (to mount a Docter or RMR) for 18" Mk12 Mod 1
- A.R.M.S. Tactical Ring Rail for front A.R.M.S. #22H scope ring (to mount a Docter or RMR) for 18" Mk12 Mod 1
- KAC NT4 QDSS for 10.3" Mk18 Mod 0 an 14.5" M4A1 (check cashed 10/26/2016, expect to have the suppressor by June 2017)

Still planning on -

- Either a DOCTERsightII or Trijicon RM01 for both the TA01NSN and Nightforce NXS 2.5-10x24 optics
- Surefire M952XM07 for Mk12 Mod 1
- CQD forward sling point for Mk12 Mod 1 (the 10.3" and 14.5" uppers have them already, but they're on the reverse side of the picture)
- Allen Engineering AEM5 suppressor for Mk12 Mod 1
- AN/PEQ-2A for 10.3" Mk18 Mod 0 and 18" Mk12 Mod 1 uppers (2)
- AN/PEQ-5 CVL for 10.3" Mk18 Mod 0 upper

[arjohnson]

Form 1 came today.

[Nate7667]

Nice compact pewer!
How do like the stock?