Results 1 to 7 of 7
Thread: CZ P-01 fail to chamber?
-
August 31st, 2007, 04:55 PM #1Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
CZ P-01 fail to chamber?
My CZ P-01 is failing to fully chamber a round sometimes.
I think what happens is that when the 1st round is chambered, the next round in the mag is being pushed forward a little bit. When the next round goes to be chambered, it stops halfway into the chamber. At least thats how it looks when I remove the mag after chambering a round.
this is with the 10 rd. factory mags as well as mec gar 14 rd. mags
This only started happening recently. What could cause it and how do I fix it? I'm going to my uncle's on Monday and he is a gunsmith so I'll probably take it along with me so he can look at it.
-
August 31st, 2007, 10:04 PM #2
Re: CZ P-01 fail to chamber?
1. Have you cleaned it lately? Especially the chambler area. Is it lubed?
2. Main spring? Is it weak/worn or did you take gun apart and possibly assemble incorrectly?
3. Ammo. Reloads (to long OAL)? Factory? Try a different factory brand type.
4. Mags? Two bad mags are a stretch but not impossible.
5. Loose grip? Some guns don't shoot well with a limp wrist/loose grip, try a tighter grip.
Let us know the outcome!!Guns are good.
If you can't fry it you shouldn't eat it
Loud pipes save lives
Mom spelled backwards spells....mom
"Please don't squeeze the Charmin." ~ Mr. Whipple
-
August 31st, 2007, 11:21 PM #3Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: CZ P-01 fail to chamber?
Last edited by WWGunslinger; August 31st, 2007 at 11:35 PM.
-
September 1st, 2007, 09:28 AM #4Junior Member
- Join Date
- Sep 2007
- Location
-
Center,
Pennsylvania
(Beaver County) - Posts
- 14
- Rep Power
- 0
Re: CZ P-01 fail to chamber?
Have you tried CZ Forum at http://p201.ezboard.com/bczechpistols82792 Lots of good info on all CZs including problems and fixes. Depending on the amount of use the P-01 has had, it may need to have the extractor removed and cleaned. This has been known to cause FTF in other CZ models.
-
September 1st, 2007, 11:04 AM #5Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
-
September 1st, 2007, 08:24 PM #6Grand Member
- Join Date
- Mar 2007
- Location
-
Newport,
Pennsylvania
(Perry County) - Posts
- 1,341
- Rep Power
- 4979
Re: CZ P-01 fail to chamber?
Tried another brand of ammo and had no issues at all.
I also shot a box of the previous ammo and had no problems with it this time.
-
September 1st, 2007, 11:25 PM #7
Re: CZ P-01 fail to chamber?
I have only shot WWB in my CZ 75-P01. Had one FTE out of 700 or so rounds. It was due for a cleaning when it happened.
Similar Threads
-
Wanted: Empty chamber flag
By Jay5oh in forum GeneralReplies: 15Last Post: February 11th, 2011, 10:26 PM -
Carrying a loaded chamber?
By Kenan in forum GeneralReplies: 51Last Post: March 24th, 2008, 11:06 AM -
Classic - SF Rookie cop who killed himself removed clip, left bullet in chamber
By WhiteFeather in forum GeneralReplies: 8Last Post: August 21st, 2007, 01:06 PM -
Cleaning the AR-15 chamber.
By OneLungMcClung in forum GeneralReplies: 7Last Post: August 14th, 2007, 11:07 AM -
when carrying with +1 in the chamber
By XD45 in forum GeneralReplies: 14Last Post: June 2nd, 2007, 06:42 AM
Bookmarks