Oil & Grease

[Maquis]

Oil & Grease on guns:

I was using some Weapon Shield on a small desk fan (my 9 y/o son is a collector ) and I got to wondering what the weight of it was (normally I use a 20w 3in1) so I went to their site and while I didn't see a weight I saw Weapon Shield grease.

So I got to wondering where grease would be used instead or along side oil and figured y'all would know.

This is for guns and not fans BTW

[Paradigm]

Grease is the word
It's got groove it's got meaning
Grease is the time, is the place, is the motion
Grease is the way we are feeling

[Maquis]

Grease is the word
It's got groove it's got meaning
Grease is the time, is the place, is the motion
Grease is the way we are feeling

[Philbert]

Oil & Grease on guns:

I was using some Weapon Shield on a small desk fan (my 9 y/o son is a collector ) and I got to wondering what the weight of it was (normally I use a 20w 3in1) so I went to their site and while I didn't see a weight I saw Weapon Shield grease.

So I got to wondering where grease would be used instead or along side oil and figured y'all would know.

This is for guns and not fans BTW

I think it might be a European thing. My Sig manual talks about using it on the slide rails.

[edsollen]

I don't typically use any grease or oil on my guns, i was taught to wipe a very slight amount on the firing pin but other than that I wipe all finger prints off with a silicone cloth. You probably know who my teacher was.

[Maquis]

I don't typically use any grease or oil on my guns, i was taught to wipe a very slight amount on the firing pin but other than that I wipe all finger prints off with a silicone cloth. You probably know who my teacher was.

No lubricants at all?

And do ya still got that .41 Blackhawk?

[edsollen]

Yup, and I took a running doe at 30 yds. a couple years ago.
And that is correct I use no lubricants other than on the firing pin. I can't speak for semi autos but on my guns this has worked well.

[Maquis]

Yup, and I took a running doe at 30 yds. a couple years ago.
And that is correct I use no lubricants other than on the firing pin. I can't speak for semi autos but on my guns this has worked well.

Well you've had that gun for a long time~can't argue with success!

[Triggerh4ppy]

I use axle grease on my ak....when too much gunk gets in there I use a degreaser and spray it all in there and re apply clean axle grease.I use break free clp on everything else

[ungawa]

Yup, and I took a running doe at 30 yds. a couple years ago.
And that is correct I use no lubricants other than on the firing pin. I can't speak for semi autos but on my guns this has worked well.

OHHHHH.... I had a .41 Blackhawk long ago... That's a whole lot of stuff in a small package. Wish I still had it.