What Trunion Fits a Romanian Draco?

[CPratt]

Does anybody know Which Underfolder Trunion Fits the Romanian Draco? It might be a dumb question but I'm thinking of a SBR project and doing some internet searching for stocks.

[Coils]

Any Com-block trunnion will work, either folder or standard.

[mojo]

Does anybody know Which Underfolder Trunion Fits the Romanian Draco? It might be a dumb question but I'm thinking of a SBR project and doing some internet searching for stocks.

The current trunnion in the Draco's are already UF trunnions. All you would need to do is it cut the wholes in the side of the receiver. You do not need to buy another trunnion if you want to do an UF.

[CPratt]

Cool Thanks

[thanker92]

Draco? Where'd you get that?

[mojo]

Draco? Where'd you get that?

http://www.classicarms.us/

Go about 1/3 of the way down the page.

[Coils]

The current trunnion in the Draco's are already UF trunnions.

Didn't know that, I was told it was a bent piece of metal riveted in.

http://www.classicarms.us/
Go about 1/3 of the way down the page.

Showing SOLD OUT now

[mpoppel41]

check the inside of the receiver too make sure the trunnion has the holes for the stock. and check the web for trunnions if it doesn't have them.
grandmasters llc sells the trunnion

[gun papa]

From what I understand, you leave the trunion in place and drill the holes. It has an undrilled underfolder trunion already.