Results 1 to 2 of 2
Thread: KT P11 slide problem
-
November 11th, 2009, 10:20 AM #1Senior Member
- Join Date
- Sep 2009
- Location
-
Oreland,
Pennsylvania
(Montgomery County) - Posts
- 280
- Rep Power
- 153
KT P11 slide problem
A couple of weeks ago this problem began: the slide doesn't stay open after the last round is ejected. (It worked fine for about 350 rounds.) It doesn't matter which ammo I use, and it does it with both of my 2 magazines. I cleaned it thoroughly and put in an empty mag, racked the slide and it still won't stay open.
Got over 500 rounds through it and it works perfectly otherwise. I did the "fluff and buff" as described at the KT Owner's Group and it's smoother than ever. Also added the mag extension so the pinky has something to grip and a trigger shoe which improved the feel when firing.
Any thoughts/experiences with this?
Thanks.
Ham radio: when all else fails.
-
November 11th, 2009, 11:59 AM #2Banned
- Join Date
- Oct 2006
- Location
-
STFU, staff
(Beaver County) - Posts
- 295
- Rep Power
- 0
Re: KT P11 slide problem
I had one of these. I liked it, and it never really gave me a problem. I did have this happen though. The catch on the slide is probably rounded a little bit.
A) if you have before, stop using the side catch lever to release the slide and chamber a round.
B) File the notch in the slide to a sharper edge.
Similar Threads
-
Update: 1911 ejection problem. - Actually extraction problem.
By cobra2411 in forum GeneralReplies: 14Last Post: May 8th, 2016, 10:57 PM -
M&P 45 slide problem?
By mtp81 in forum GeneralReplies: 17Last Post: May 15th, 2009, 02:43 PM -
slide bite!!
By Bigrepp61 in forum GeneralReplies: 1Last Post: March 25th, 2009, 10:03 AM -
1911 Slide Slide Stop, How to.....
By Wildturk in forum GeneralReplies: 4Last Post: April 6th, 2008, 08:02 PM -
Ruger P95 Slide
By thespider in forum GeneralReplies: 3Last Post: October 16th, 2007, 10:02 AM
Bookmarks