Results 1 to 10 of 12
Thread: My slow AR build
-
November 10th, 2009, 09:26 PM #1
My slow AR build
Had a Colt HBAR that I traded for an M1 Garand. Decided a while back to order an Anvil Arms lower to build a second AR. Well that took quite a while to get from Anvil thanks to our buddy Barry Osamma.
Just recently decided to get a LPK and stock. Ordered from BravoCompanyUSA.com. They have DPMS LPK's for $49.95, thats quite a bit lower than they were recently. Also, got a BCM M4 stock. Now I just need to get an upper. Looking at CAR or middy, not sure. Build didn't take too long but I did use the videos on Brownells website. They are pretty nice.
Question for those with AR knowledge. Am I limited to 16"? I know I read some stuff before but can't recall. What are the restrictions here in PA for barrells?
"A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997
-
November 10th, 2009, 10:26 PM #2
Re: My slow AR build
No PA regs, federal regs require you to pay for a $200 tax stamp and get the lower engraved for anything less than 16". 16" or longer though and the sky's the limit. Uppers are not firearms so you can just have them shipped to your home and swap them out when the mood strikes you. As long as you do not go under the magical number to the EVIL less than 16" barrels the BATFE ninjas should leave you alone . . . probably.
Warning: I may not read responses to OP before posting
-
November 10th, 2009, 10:28 PM #3
Re: My slow AR build
If I understand your question correctly, a 16" barrel is the shortest you can legally go, unless you want to make a short barreled rifle (SBR). That would entail a long wait and $200.00. You can go shorter than 16" but must permanently attach something to make it longer than 16 such as a long muzzle brake or fake silencer.
You can find 16", 20" and 24" barrels from Del-Ton, also completed uppers.
http://www.del-ton.com/AR_15_Barrel_Kits_s/6.htm
Not sure about the minimum length for PA, I thought they followed federal laws in that respect which is 16".We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
-
November 10th, 2009, 10:33 PM #4
Re: My slow AR build
Right, forgot to put that in, Thanks!
You can find 16", 20" and 24" barrels from Del-Ton, also completed uppers.
http://www.del-ton.com/AR_15_Barrel_Kits_s/6.htm
Not sure about the minimum length for PA, I thought they followed federal laws in that respect which is 16".Warning: I may not read responses to OP before posting
-
November 11th, 2009, 08:29 AM #5
Re: My slow AR build
You guys answered my question. Thanks!
Just need to save a little $$ now to get an upper. It's probably not going to be anything fancy or expensive. Maybe a BCM, Stag, or DPMS upper. I keep looking and drooling.
I'd like to maybe go with a .458 or 6.8 but I have everything to reload 223 and already have nearly a 1,000 put together. So for now its gonna be 223/5.56.
"A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997
-
November 11th, 2009, 09:29 AM #6
-
November 11th, 2009, 03:11 PM #7
Re: My slow AR build
"A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997
-
November 12th, 2009, 02:07 AM #8
Re: My slow AR build
BCM has some damn nice uppers right now and at an excellent price right now. I was going to buy one of theirs last year but the LMT's were in stock.
Warning: I may not read responses to OP before posting
-
November 12th, 2009, 09:25 PM #9
Re: My slow AR build
I like my ARs fast.
-
November 20th, 2009, 12:12 AM #10
Re: My slow AR build
Well thanks to that fat red suited bearded fellow coming early I got a Stag Arms Upper! Man I luv my Wife!!!!! It came today and my son and I finished putting it together. I like, nothing fancy but it is ours!! I really like BravoCompanyUSA.com.
Now I need help again for you AR folks. I have Leupold 4X that I would like to throw on it every now and then to pay around with. I need some type of base to raise the scopa above the front sight. I would appreciate all help you can give the monkey. I'd like to have something I can throw on and off and still keep zero without spending a fortune.
Heres what I an working with!
"A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997
Similar Threads
-
Slow responding between threads, etc.
By Xringshooter in forum GeneralReplies: 114Last Post: October 27th, 2009, 01:02 AM -
Slow or not connecting at all..
By psnyder in forum GeneralReplies: 4Last Post: March 1st, 2009, 05:52 PM -
slow page
By dsljay in forum GeneralReplies: 3Last Post: October 3rd, 2007, 08:50 AM -
Slow Motion Ak-47 Video
By phillyd2 in forum GeneralReplies: 1Last Post: May 2nd, 2007, 11:41 PM -
seems a little slow
By crowsnest2002 in forum GeneralReplies: 20Last Post: March 15th, 2007, 09:12 PM
Bookmarks