Results 1 to 10 of 12
Thread: glock armorer
-
November 2nd, 2009, 06:20 PM #1
glock armorer
Hey, anyone know where a reputable glock armorer is in the upper bucks/montco area and how much does it typically cost to change all the springs in the pistol as part of a every two year maintenance. This may belong in the gunsmithing section, but I'm not looking to do it myself and I figured i might get more responses in this section. Thanks in advance.
Now less Glock, more H&K :)
-
November 2nd, 2009, 09:24 PM #2
Re: glock armorer
I asked a similar question a few years ago. And, while I did get a response, I decided to try it out myself anyway.
Seriously, a punch (or a Glock armorer's tool), the springs, and 15 minutes is all you'll need. it really is that simple. If you were closer, I'd do it for you for free.
SkullzComplete equality isn't compatible with democracy, but it is agreeable to totalitarianism. After all the only way to ensure the equality of the slothful, the inept and the immoral is to suppress everyone else. - Iain Benson
-
November 2nd, 2009, 09:40 PM #3
Re: glock armorer
You have an ironic screen name for the question
It's the first time I heard that you have to change all springs every 2 years. It's usually round count, not time frame. You can search youtube for videos for how-to's. Here's an example:
You can also call around. Many local gun shops have certified Glock armorers working on site.
Al
-
November 2nd, 2009, 11:19 PM #4
Re: glock armorer
Do it yourself, 1 day there might not be someone there to help you....
Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom.JFK
-
November 3rd, 2009, 12:52 AM #5
Re: glock armorer
LOL, yes I guess I didn't put much thought into my screen name other than the fact that those are the types of guns I own. I figured two years because by then I will have put a couple thousand rounds through the gun. My whole thing is I would hate to get it apart and then not be able to put it back together again..
Now less Glock, more H&K :)
-
November 3rd, 2009, 12:52 AM #6
-
November 3rd, 2009, 04:40 PM #7
Re: glock armorer
I bought a bunch of stock Glock springs from Midway USA. Most of the springs are under $10.
Here's the link to the Glock part section, you just have to select the model and check out the parts:
http://www.midwayusa.com/BROWSE/Brow...649***20766***
Here's the link to the Glock Disassembly tool, It's only $9.79:
http://www.midwayusa.com/viewProduct...tNumber=181144
I just use a brass punch to take apart my whole gun, you really don't need the Glock tool. Make sure you order Stock Glock parts. If you start playing around with reduced power springs it can cause some serious reliabilty and saftey problems if you don't know what you're doing. Glocks are super easy to take apart. Just watch the videos and maybe even get a drawing of your specific gun and it should be no problem. All the info is online.Any vote for a third party is a vote for a Democrat. You are the enemy.
-
November 3rd, 2009, 08:33 PM #8
-
December 17th, 2009, 07:07 AM #9
Re: glock armorer
I know this thread is a little old but I'm posting for the benefit of others.
I went to Glock Armorer's school yesterday.
It was suggested that every gun in your arsenal be completely broken down and "checked" once a year. Nothing about "replacing springs every 2 years". If you notice something during your "check" then you attend to it. If you're not properly trained in how to "check" then you have no idea what to check or how to check it. Hence the armorer's training.
There are basically only 5 "springs" on a Glock, in the true sense of a spring (there are a couple clips that are referred to as springs). One spring is on the firing pin, One is on the trigger bar, one is on the firing pin safety, one is on the extractor depressor plunger and lastly, the recoil spring under the barrel. I guess you could consider the one in the magazine as another one. The only spring that was recommended to be changed regularly was the recoil spring under the barrel, every 5000 rounds.
Like I said there are specific checks and tests to determine if any of the other springs need replacing but if the gun is firing normally then there was no mention of them being replaced.
The only spring I would recommend replacing yourself without any training is the recoil spring. No, it isn't rocket science but if you mess something up then you WILL be in for an expensive trip to a real Glock armorer.
It's kind of like trying to fix your own car or plumbing, making the matter worse, then having to pay the mechanic or plumber extra to not only fix the original problem (do you even have one?) but the one you caused.
Hope that adds light to the subject.NRA Instructor/RSO
C.A.R. Instructor
Certified Glock Armorer
-
December 17th, 2009, 11:12 PM #10Grand Member
- Join Date
- Mar 2009
- Location
-
Southwest,
Pennsylvania
(Washington County) - Posts
- 1,942
- Rep Power
- 21474853
Re: glock armorer
I just wanted to say that I completely disagree with the above poster. Do it yourself. It's incredibly simple. You will not mess anything up, and you will have a better understanding of how your pistol functions.
Similar Threads
-
Philly suburbs source for Glock Armorer's tool?
By toml in forum GeneralReplies: 16Last Post: July 7th, 2015, 01:51 PM -
Glock Armorer In Lehigh Valley
By cderk in forum GeneralReplies: 2Last Post: September 22nd, 2009, 08:43 PM -
Is the Lone Wolf, 4 in 1 Glock Armorer's tool worth getting?
By HiredGoon in forum GeneralReplies: 19Last Post: May 19th, 2009, 11:44 AM -
Glock Armorer classes?
By Mastiff4570 in forum GeneralReplies: 3Last Post: October 22nd, 2008, 09:27 PM -
Glock Armorer in the Valley?
By Skullz in forum GeneralReplies: 11Last Post: September 19th, 2008, 11:53 PM
Bookmarks