Results 1 to 9 of 9
Thread: Bulge in my hp ammo?
-
August 13th, 2009, 09:45 PM #1
Bulge in my hp ammo?
I'll try and get pictures up tommorow morning.
I bought a 20rd box of 124gr +p speer gold dot, 9mm.
I just noticed when looking at them earlier, around where the bullet is seated inside the casing, it kind of bulges out and then dips back in where bullet ends.
I compared it side by side with my fmj and some federal hydra-shok and neither of those rounds have this bulge.
whats up?
-
August 13th, 2009, 09:59 PM #2
Re: Bulge in my hp ammo?
Could wait for pics, but is it all the way around, or just bulged in one spot/on the side?
I always look at my rounds as I load them. I found a WWB(or was it UMC?)with an obvious flaw/bulge in it once.I called to check my ZIP CODE!....DY-NO-MITE!!!
-
August 13th, 2009, 10:21 PM #3Grand Member
- Join Date
- Nov 2007
- Location
-
Chambersburg PA (Pure Appalachia),
Pennsylvania
(Franklin County) - Posts
- 1,649
- Rep Power
- 650477
-
August 13th, 2009, 10:24 PM #4
-
August 13th, 2009, 11:52 PM #5
-
August 13th, 2009, 11:56 PM #6
Re: Bulge in my hp ammo?
_________________________________________
danbus wrote: ...Like I said before, I open carry because you don't, I fight for all my rights because
you won't, I will not sit with my thumb up my bum and complain, because you will.
-
August 14th, 2009, 12:21 AM #7
Re: Bulge in my hp ammo?
yeah..my 124gr gold dots have bulges too..fire just fine.
Peace, Prosperity, and Liberty
-
August 14th, 2009, 08:11 AM #8
Re: Bulge in my hp ammo?
The "bulge" isn't necessarily a bulge. When the cases are formed (or reformed when you reload) they sometimes are a bit undersized when compared to the OD of the bullet. This is not a bad thing as semi-autos headspace on the case mouth and so you don't want to use a roll crimp to hold the bullet in place, and the bit undersized case helps secure the bullet. If they feed fine and shoot ok, then nothing to worry about.
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
August 14th, 2009, 10:37 PM #9Member
- Join Date
- Jul 2009
- Location
-
Port Allegany,
Pennsylvania
(McKean County) - Posts
- 35
- Rep Power
- 0
Re: Bulge in my hp ammo?
The only thing that bulge indicates, is that you're going to have a nice consistent "bullet pull" caused by the nice and snug case.
Similar Threads
-
.40 S & W ammo...MagSafe MiniGlock loads (+ some loose ammo)
By AFARR in forum GeneralReplies: 3Last Post: September 1st, 2009, 05:25 PM -
357 Barrel Bulge
By Bookers in forum GeneralReplies: 18Last Post: November 20th, 2008, 10:12 AM -
WTS/split M44 and ammo/Marlin 60 and ammo
By dannyboy762 in forum GeneralReplies: 0Last Post: August 22nd, 2008, 02:56 AM -
WTT: Winchester .25 WSSM Ammo for 7mm-08 ammo
By fultonCoShooter in forum GeneralReplies: 0Last Post: January 22nd, 2008, 12:10 PM
Bookmarks