25 cal raven semi auto

**papertexan** · June 29th, 2009, 08:08 PM

does anyone have any information on howw to field strip a 25 cal Raven Arms semi-auto?

**knight0334** · June 29th, 2009, 08:19 PM

its easy.

1. !make sure its unloaded!
2. decock it by pulling the trigger
3. use a small screwdriver, punch or some other rod to depress the bushing around the striker while lifting somewhat on the back of the slide.
4. lift slide off receiver a little and move it forward towards muzzle.

Watch out for the recoil and striker springs, they could be under some tension and may go BOING sending the springs, the striker and bushing flying.

Reverse for reassembly.

**mickey01023** · July 4th, 2009, 03:36 AM

Originally Posted by papertexan

does anyone have any information on howw to field strip a 25 cal Raven Arms semi-auto?

http://www.youtube.com/watch?v=tLUBG70cizY

**riverpirate** · July 4th, 2009, 10:25 AM

An even easier way .....

1. unload
2. take hammer and beat until it comes apart
3. take all the pieces and throw in the garbage
4. use hammer for self defense.