New, adjustable AK-type gas block for AK47 and variants, shot in semi-auto and full-auto modes. Material: 4140 crome moly steel Overall Dimensions: 2.145” L x 2” W x .945” H Fits: AK47 & Variant .592 diameter barrels Advantages: * reduces recoil * reduces damage to receiver rails and rivets in the rear trunion and rails * Bolt carrier racking is reduced * Minimizes carbon build-up on the piston head and shaft * Enhances bullet velocity by using less gas to cycle the system * Adjustments -off position for single shots to a full gas position for any load available Simple Installation: The adjustable gas block can quickly and easily be installed: Remove the front sites from the barrel by removing pins. Next remove pins from the old gas block. Then remove the existing block from the barrel. Lastly, install the adjustable gas block on barrel and align the gas port hole with the gas block port. Apply Lock-Tite to the set screw tips and tighten securely allowing time to dry.
$99.99


Flat Rate Shipping of $7.95 For as many items as you would like to order on one order, excluding certain cases of ammo.

To order, give us a call at 1 866 523 2673 or 1 866 775 9466 Mon-Fri, 9-5p.m. EST or check out the website and/or order by clicking here Cope's Distributing

If you have questions or would like to place an order via email, you can do so by contacting me at geri@copesdistributing.net