Results 1 to 9 of 9
-
January 18th, 2009, 03:54 AM #1
Second AR Build since Nov. 4th! :D
The M4 is a fricken Laser beam. Have yet to extensively test out the M16, but from what I can tell, its at least 1 MOA @ 100 yards.
Top to bottom:
M16A2 Copy:
LAR Grizzly-15 Lower $190
DPMS LPK - $90
A2 Buttstock Kit - $65
Ambidextrous Safety - $30.00
Magpul Industries Winter Trigger Guard - $18.95
Bushmaster 20" Flat-top A2 Government Profile 1/9 5.56mm upper - $495
Rock River Arms Bolt Carrier Group - $110
Rock River Arms Forged Charging Handle - $25.00
Flat Top Detachable Carry Handle - $85.00
---------------------------------
Total - $1,110
M4gery:
LMT Lower (Marked Costal Gun, Inc) - $282
Rock River Arms Lower Kit/RRA Two Stage Trigger/M4 6-pos Stock Kit - $269
Sight tool/Magpul Trigger Guard/Ambi Safty - $63.95
GG&G Dominator-1 Upper Receiver & GG&G Front Grip - $886
Lower tools/RRA Ergo Grip - $46.95
Aimpoint Comp ML2-2x 2 MOA Dot - $362
Scope Mount - $28.80
Surefire G2 - $36.95
Alpha G8 390 Lumen Bulb - $39.70
Flashlight Mount - $16.70
Lancer L5 Mags - $177.45
------------------------------------
Total: $2,110
BOTTOM LINE: A lot of money spent, but I believe it was all worth it, noting the political climate.
Last edited by FireGS; January 18th, 2009 at 11:56 AM.
Join the CHAT! Http://www.pa-zrt.com
-
January 18th, 2009, 04:07 AM #2
Re: Second AR Build since Nov. 4th! :D
nice looking pair you got there.. i wish i had the money and know how on how to build one
-
January 18th, 2009, 07:30 AM #3
Re: Second AR Build since Nov. 4th! :D
-
January 18th, 2009, 11:55 AM #4
Re: Second AR Build since Nov. 4th! :D
It's just a Surefire G2 LED light, but I went on ebay and searched for other bulbs, and this outfit called Alpha makes replacement bulbs that rate at close to 390 lumen, and the cost is very reasonable.
EDIT: Just notiec my OP had some bad info, listed my Aimpoint twice, instead of the Surefire. It's been fixed.Join the CHAT! Http://www.pa-zrt.com
-
January 18th, 2009, 12:13 PM #5
Re: Second AR Build since Nov. 4th! :D
If $ is the issue you should consider a build. I knew absolutely nothing about these a few weeks ago. I still know next to nothing but when you post a question here you'll get all kinds of answers and help.
I have a stripped lower on order from Anvil Arms. Once I get it and save some more $ I'll buy a lower parts kit (LPK). That's when I'll need some more help and I know (hope ) I'll get my answers from all the knowledgable folks here.
A build is the best way to go. You can buy what when you can afford it.
I'm not a big fan of this forum but there is a lot of useful info over there. Check out this link.
"A gun in the hands of a bad man is a very dangerous thing. A gun in the hands of a good person is no danger to anyone except the bad guys." ~ Charlton Heston, 1997
-
January 18th, 2009, 12:19 PM #6
Re: Second AR Build since Nov. 4th! :D
lpk is easy to install, no more than 20-30 minutes - taking your time.
mag catch assembly takes less than one minute to install, bolt catch about 2-3 minutes (including prep time with tape), about a minute for the pivot pin/ spring/detent (maybe more if it's your first time), and about 5-10 minutes for the FCG. then your safety/spring/detent/pistol grip is a minute or so as well.
Trigger guard is easy too.
If you have your stock the td pin can be put in now too.
I'd be glad to help anyone near allegheny country if they need it.
-
January 18th, 2009, 12:30 PM #7
Re: Second AR Build since Nov. 4th! :D
OBAMA for gun salesman of the year. That man has done more for the firearms industry than any advertising they could have come up with.
Nice collection of AR's you have there.
-
January 18th, 2009, 10:30 PM #8Member
- Join Date
- Oct 2008
- Location
-
Feasterville,
Pennsylvania
(Bucks County) - Posts
- 77
- Rep Power
- 153099
Re: Second AR Build since Nov. 4th! :D
how do you like the lancer mags? you have any problems with them?
Just another "bitter" PA gun owner
-
January 18th, 2009, 10:31 PM #9
Re: Second AR Build since Nov. 4th! :D
LOVE EM! Havent had any problems yet!
Join the CHAT! Http://www.pa-zrt.com
Similar Threads
-
Your AR Build
By RussianSKS in forum GeneralReplies: 30Last Post: March 4th, 2009, 12:04 PM -
AK build ?
By BFit70 in forum GeneralReplies: 13Last Post: November 18th, 2008, 03:07 PM -
looking for a SxS to build into a SBS in 09
By Mooseman in forum GeneralReplies: 3Last Post: November 10th, 2008, 10:29 PM -
What was your first AR build?
By jcabin in forum GeneralReplies: 8Last Post: November 10th, 2008, 01:03 PM -
Help me build an AR
By Spectre6 in forum GeneralReplies: 32Last Post: June 5th, 2008, 10:55 AM
Bookmarks