Results 1 to 10 of 10
Thread: anyone have a fft wrench?
-
January 5th, 2009, 02:52 PM #1Super Member
- Join Date
- Nov 2008
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Age
- 42
- Posts
- 792
- Rep Power
- 78
anyone have a fft wrench?
im trying to swap the parts of a upper i bought from a pafoa'er and all thats holding me back is the free float tube base any ideas???
V-DUB Shop!DUBNINJA 82
-
January 5th, 2009, 02:57 PM #2
Re: anyone have a fft wrench?
do you just need to get the barrel nut off that upper I sold you?
If so you could do this....
reattach it all up, and then use a strap wrench to loosen the barrel nut (with the anti rotation screws in), otherwise you'll need a FFT wrench...the tube itself is a YHM, so theirs would be best fitting.
This is how lycan reccomended I do it as well if I didnt have the wrench or a torque wrench.
-
January 5th, 2009, 03:33 PM #3Super Member
- Join Date
- Nov 2008
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Age
- 42
- Posts
- 792
- Rep Power
- 78
Re: anyone have a fft wrench?
what are the torque specs??
V-DUB Shop!DUBNINJA 82
-
January 5th, 2009, 03:37 PM #4
Re: anyone have a fft wrench?
there's a thread over at AR-15.com that should give the exacts.
-
January 5th, 2009, 03:56 PM #5Super Member
- Join Date
- Nov 2008
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Age
- 42
- Posts
- 792
- Rep Power
- 78
Re: anyone have a fft wrench?
most of the threds i looked at said not to go over 80 ftlbs so hand tight and a 1/4 turn it is
V-DUB Shop!DUBNINJA 82
-
January 5th, 2009, 09:27 PM #6
-
January 5th, 2009, 09:41 PM #7
Re: anyone have a fft wrench?
-
January 5th, 2009, 10:56 PM #8
-
January 6th, 2009, 12:31 AM #9Super Member
- Join Date
- Nov 2008
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Age
- 42
- Posts
- 792
- Rep Power
- 78
Re: anyone have a fft wrench?
im pretty good at hitting the hole......lol
V-DUB Shop!DUBNINJA 82
-
January 9th, 2009, 01:18 PM #10Super Member
- Join Date
- Nov 2008
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Age
- 42
- Posts
- 792
- Rep Power
- 78
Re: anyone have a fft wrench?
i got it all swapped over today, i riged my own strap wrench out of a leather belt and a nagant bayonet got everything on the flattop and good and tight. it took a few time to get it tight and lined up but i did it!! now a bcg and a range report are next.
V-DUB Shop!DUBNINJA 82
Similar Threads
-
Which m4 stock wrench?
By celisup78 in forum GeneralReplies: 1Last Post: January 3rd, 2009, 03:53 PM -
Barrel wrench for Dan Wesson 357
By bripro in forum GeneralReplies: 10Last Post: December 11th, 2008, 05:39 PM -
I need an allen wrench for my Crimson Trace grips
By djturnz in forum GeneralReplies: 4Last Post: November 21st, 2008, 09:43 AM -
Impact Wrench
By Johannes_Paulsen in forum GeneralReplies: 12Last Post: October 9th, 2008, 09:57 AM -
Metric FAL parts, 40 brass, CAR wrench, compass, M&P holster, lever wrap
By goon in forum GeneralReplies: 0Last Post: December 19th, 2007, 11:47 PM
Bookmarks