Sighting in...

**ironcowboy** · January 4th, 2009, 12:53 AM

Well after changing my ruger up a little (auto bolt release, new buffer, JB weld on the sear, new tapco stock (which doesent fit right) and a crappy reddot)I took it out and did some shooting today. I was quite surprised that it shot alright, even with the down pressure on the barrel from the stock. I am still waiting for my EOtech clone and pic rail for the receiver, so i just put the $30 tasco reddot on the front barrel cover. I was shooting at about 30ish paces kinda resting on the front of my truck.

Target,

and the gun,

**eells** · January 4th, 2009, 01:17 AM

i definately think my next purchace is gonig to be a 10/22. i guess i should try and get some of the hi-cap mags first, while i still can...

**mauser** · January 4th, 2009, 01:20 AM

Originally Posted by eells

i definately think my next purchace is gonig to be a 10/22. i guess i should try and get some of the hi-cap mags first, while i still can...

Not a bad thought. The gun will most likely still be readily available and affordable long after the evil accessories are not.

**Fragger** · January 4th, 2009, 09:37 AM

Looks like it shoots well enough.

JB Weld on the sear?

Tell me more about that please .. or did you post about that somewhere else?

**Tomcat088** · January 4th, 2009, 11:06 AM

This is just a guess, but it sound like he probably added some material to try to change the way the sear engages and how it functions with the trigger. Meaning a home made trigger job, but I don't know that for sure, let's just see what his reply will be.

**ironcowboy** · January 4th, 2009, 03:51 PM

I wasent taking my time there, just shooting quite fast. And the reddot's dot is kinda big, i hope to tighten those up a little once i get the new sight.

You put a little JB weld on the sear, and then file it down till you get it just right to remove the pre-traval, here is a link to a page on how to do it. http://rimfirecentral.com/forums/sho...d.php?t=251077