Results 1 to 3 of 3
Thread: 9mm 155gr Cast bullets
-
January 1st, 2009, 12:35 PM #1
9mm 155gr Cast bullets
THIS IS LOAD DATA WE'RE USING. IF YOU DECIDE TO USE IT, USE IT AT YOUR OWN RISK....
We got 25 cast heads, so we reloaded them as follows:
13:
Bullet-155gr Cast 9mm
Powder-4gr Unique
Primer-Federal 100
OAL-1.13
12:
Bullet-155gr Cast 9mm
Powder-4.5gr Herco
Primer-Federal 100
OAL-1.13
I'm shooting them today and will come back with reload data tonight and photos, if I keep the targets.Peace, Prosperity, and Liberty
-
January 1st, 2009, 01:11 PM #2
Re: 9mm 155gr Cast bullets
I'm interested in your results. I like handloads with heavier cast bullets for 9mm. You don't have to drive them fast enough to worry about leading, and I've gotten good accuracy from 147 gr. cast loads.
"Never give up, never surrender!" Commander Peter Quincy Taggart
-
January 1st, 2009, 07:43 PM #3
Re: 9mm 155gr Cast bullets
I had a few FTF and 1 got jammed bad in the gun...
The others that did fire, didn't do too bad.
I shot in 25 degree weather, I'm not sure if it affects the lead or not...
my grouping wasn't tight, but I'd say it was a 3in circle...not acceptable to me.Peace, Prosperity, and Liberty
Similar Threads
-
Bullets.. Lead Cast bullets,380, 9mm, 38spcl, 357mag, 45ACP, 45LC
By bomarfirearms in forum GeneralReplies: 0Last Post: November 16th, 2008, 06:04 PM -
WTS: 45 acp cast lead bullets
By camaroracer in forum GeneralReplies: 1Last Post: May 23rd, 2008, 09:56 PM -
Reloading 147 gr cast bullets in 9mm?
By JoeWilliams in forum GeneralReplies: 3Last Post: March 23rd, 2008, 08:09 PM -
Laser cast bullets
By RUDY850 in forum GeneralReplies: 0Last Post: May 27th, 2007, 12:26 AM -
Cast Bullets
By coydog in forum GeneralReplies: 0Last Post: March 16th, 2007, 07:27 AM
Bookmarks