Results 1 to 10 of 10
-
September 5th, 2023, 10:23 PM #1
So You Wanna Build a 7.62x39 AR15?
Here's a pretty well laid out bit of helpful info, presented in a non-intimidating manner, that covers literally everything I could have thought of if someone were to ask for my input on this topic.
The only part I may not have thought to mention is the "extractor" info, which I just started delving into recently.
As I was watching, I said "Wolff Extra Power Hammer Spring!", thinking he neglected to cover that, but no, he added that in a bit later.
Good info. Love the format.
I love being an enabler with the "Deals" thread and with two x39 builds under my belt, I'm more than happy to answer any questions anyone may have if they ever thought about it, but didn't know where to start.
I don't claim to be an expert, but I certainly must have learned "something" if the guy in the video covered everything I would have said.
Even if you don't want a x39 AR, go build one you DO want!
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 6th, 2023, 10:48 AM #2
Re: So You Wanna Build a 7.62x39 AR15?
Seems everyone agrees with my assessment that Duramag (C-Products Defense) is the bestest and the 28 rounders are the bestest of the bestest.
Skip to 6:50 since he wastes everyone's time talking first about a Unimag, which even at the time of filing, is not even being made any more.
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
September 6th, 2023, 10:56 AM #3
Re: So You Wanna Build a 7.62x39 AR15?
Nice thread and video in the OP; but I didn't watch it all.
If the video producer didn't mention it, I would add the purchase of a Black Rifle Arms Enhanced 7.62x39 firing pin:
https://www.blackriflearms.com/AR-15...g-Pin_p_9.html
It's a skosh longer than a standard AR firing pin, and works very well on Russian/Ukrainian ammo with hard/thick primer cups but does not cause blowouts of primer cups on standard primers, in my experience. With the BRA Enhanced FP, you don't need the extra power hammer spring, again in my experience.
NoahWisdom and knowledge shall be the stability of thy times.
-
September 6th, 2023, 11:36 AM #4
Re: So You Wanna Build a 7.62x39 AR15?
Yes, he mentions an enhanced firing pin. That's pretty much the number one thing needed. If you get random light strikes, just get an enhanced firing pin and start there - it's probably all you need to do.
He mentions that brand as well.
Of the three guns I own, one (the first build) benefitted from the extra power hammer spring in addition to the enhanced firing pin, so I just used an extra power hammer spring in the others as well.I called to check my ZIP CODE!....DY-NO-MITE!!!
-
October 6th, 2023, 02:25 PM #5
Re: So You Wanna Build a 7.62x39 AR15?
20 round, 28 round, and 30 round Duramag (C-Products Defense)
On sale now at Primary Arms - $15.00, $16.00, and $16.50 - great pricing - especially the 20 rd
https://www.primaryarms.com/ad/sale/...azines-on-sale
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
October 6th, 2023, 02:45 PM #6
Re: So You Wanna Build a 7.62x39 AR15?
My first 7.62x39 build - circa 2017
https://forum.pafoa.org/showthread.php?t=317301
Base is a GWACS ARMORY CAV-15 MKII polymer lower/stock
Barrel Palmetto State Armory mid-weight barrel w/mid-length gas
Seekins Precision adjustable gas block
Voo-Doo Innovations Jet Comp muzzle device
Rainier Arms Evolution handguard (made by Samson)
APOC Armory BCG w/enhanced firing pin
Wolff Extra power hammer spring
BCM stubby fore grip
Specter Gear butt stock magazine pouch
Specter Gear "Recon" sling
Monstrum Tactical "Ghost" red dot/3 magnifier combo
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
October 6th, 2023, 03:39 PM #7
Re: So You Wanna Build a 7.62x39 AR15?
Those banana clips are really bananaie.
FJB
-
October 6th, 2023, 03:52 PM #8
-
October 6th, 2023, 09:46 PM #9
Re: So You Wanna Build a 7.62x39 AR15?
My second 7.62x39 build - circa 2019
https://forum.pafoa.org/showthread.php?t=352379
Upper - Aero Precision - no forward assist
Lower - Palmetto State Armory "LIBERTY" stripped, virgin lower
Barrel - Radical Firearms 7"
Muzzle Device - Rousch Sports - "Arkum Knight" Concussion Diversion Device Flash Can, Krinkov style
Gas Block - Rousch Sports - low profile micro - Melonite coated/black nitride
BCG - Toolcraft 7.62x39 Full Auto BCG - Black Nitride w/ Enhanced Firing Pin
Charging handle - Spikes Tactical - Standard
7.62x39 Engraved Dust Cover - double sided
Hammer Spring - Wolff XP (extra power)
Hand Guard - Aero Precision 7" ATLAS S-One M-LOK
Grip - Magpul MOE K-2 (reduced angle)
Trigger Guard - Rainier Arms aluminum Modified Trigger Guard
Bolt Catch - Patriot Ordnance Factory enhanced bolt catch
Extended Mag Release - Odin Works (first version)
LPK - Aero Precision
Sights - Sig Romeo 5 red dot + Front/Rear Chinese flip up BUIS
Current configuration. Before the brace debacle, it wore a SB A3 brace
I called to check my ZIP CODE!....DY-NO-MITE!!!
-
October 7th, 2023, 01:17 PM #10
Similar Threads
-
7.62x39 AR build!
By Misery Loves Shotguns in forum Gun PicturesReplies: 7Last Post: May 29th, 2020, 03:50 PM -
7.62x39 AR15 Pistol - Add Your Input for an Affordable Build
By Emptymag in forum PistolsReplies: 94Last Post: August 16th, 2019, 09:10 PM -
AR15 7.62x39 upper receiver build ??
By buffalodiesel in forum GunsmithingReplies: 4Last Post: October 27th, 2013, 07:12 AM
Bookmarks