Results 1 to 10 of 29
Thread: Looking for a decent 9mm for EDC
-
May 29th, 2023, 02:27 PM #1
Senior Member
- Join Date
- Feb 2012
- Location
-
Susquehanna County,
Pennsylvania
(Susquehanna County) - Posts
- 431
- Rep Power
- 375955
Looking for a decent 9mm for EDC
There are so many options I don’t know where to start. I have a Springfield XDM Elite in .45 and that is a good gun that I intend to keep. It is a little large and heavy for IWB, which is why I am looking for something a little easier and more comfortable to conceal and carry for extended periods of time.
I am on a budget, so I’d Like to keep it around $500 if possible. I know this topic has probably been beaten to death, but it is what it is, and I could use some guidance.
Thanks, Isaac
-
May 29th, 2023, 02:28 PM #2
Grand Member
- Join Date
- Apr 2009
- Location
-
Upper Bucks,
Pennsylvania
(Bucks County) - Posts
- 2,202
- Rep Power
- 21474853
Re: Looking for a decent 9mm for EDC
P365
P365XL
P365-XMACRO
-
May 29th, 2023, 02:36 PM #3
Re: Looking for a decent 9mm for EDC
Go to the group shoot in July, ask the guys to bring their favorite EDC 9(s) along and check them out.
2024 Trump or Bust!
-
May 29th, 2023, 03:32 PM #4
Grand Member
- Join Date
- Aug 2009
- Location
-
bloomsburg,
Pennsylvania
(Columbia County) - Posts
- 1,605
- Rep Power
- 21474852
Re: Looking for a decent 9mm for EDC
At this time the Sig 365 variants, The Springfield Hellcat, Glock 43, and the S&W shield are likely the most popular for CC. Taurus makes cheap junk that only a imbecile would buy. Some of the aforementioned might fit your budget, but high end versions that have all the bells and whistles might be pricey.
-
May 29th, 2023, 03:46 PM #5
Re: Looking for a decent 9mm for EDC
As was stated in all the other similar threads about this, you need to shoot them to know what fits you best. The group shoot idea is a good one, or go rent a bunch. If that $500 budget includes used guns, there's going to be quite a long list of options. You may be able to narrow it down based on a few key specs like striker vs hammer, mag capacity, size (micro, sub, compact), etc. though.
-
May 29th, 2023, 03:51 PM #6
Senior Member
- Join Date
- Feb 2022
- Location
-
Under a mountain
- Posts
- 484
- Rep Power
- 19939923
Re: Looking for a decent 9mm for EDC
P365 since 2018 for me.
-
May 29th, 2023, 03:54 PM #7
-
May 29th, 2023, 04:00 PM #8
Re: Looking for a decent 9mm for EDC
This is the Central Pa one (post #65 has 2023 date): https://forum.pafoa.org/showthread.php?t=388478&page=4
But you know there is a 'Shoots and Range Trips' sub-forum, right?
-
May 29th, 2023, 10:17 PM #9
Active Member
- Join Date
- Nov 2022
- Location
-
Hanover,
Pennsylvania
(York County) - Posts
- 100
- Rep Power
- 982975
Re: Looking for a decent 9mm for EDC
Some good options mentioned above but a good dependable gun for the money is the Canik TP9 Elite SC 9mm. You can find one for around $375-400. They come with two 12 rnd mags so decent capacity for sub compact. I don't have one but I hear the Canik METE MC9 Micro Compact 9mm is a good gun too but it's at or in some cases over your stated price point. Good luck with whatever you end up with!
-
May 31st, 2023, 05:53 AM #10
Senior Member
- Join Date
- Feb 2012
- Location
-
Susquehanna County,
Pennsylvania
(Susquehanna County) - Posts
- 431
- Rep Power
- 375955
Re: Looking for a decent 9mm for EDC
Thank you, I didn’t n no ow about that sub-forum. I’ll check that out.
Similar Threads
-
is this a decent ar-15
By jeep in forum GeneralReplies: 17Last Post: November 4th, 2011, 11:33 AM -
Decent Red Dot for AR?
By reb. in forum OpticsReplies: 27Last Post: April 10th, 2011, 06:19 PM -
Why you should always have a decent map!!
By Fred762 in forum GeneralReplies: 2Last Post: December 29th, 2009, 06:51 PM
Bookmarks