Will this work ?

[joeyj]

I have a Ruger 22/45. I had to send it back to the factory and they fixed all the problems. Now the only problem I have is the trigger pinches my finger and is no fun to shoot. No matter how I hold it I get the same results. I was wondering if I took my Dremmel and carefully ground off that sharp edge, will that help me ? I checked on replacement triggers and there around a hundred dollars plus a gunsmith charge. I admit these old hands don't like getting pinched. Anybody have any suggestions. Joe

[RockIsland]

Trigger shoe?

Volquartsen black replacement target trigger is $35.

https://forum.pafoa.org/showthread.php?t=390515

[joeyj]

Whats a trigger shoe ?

[RockIsland]

Whats a trigger shoe ?

It bolts on the trigger with hex screws, offering wider trigger contact with your finger.

[imashooter2]

It*s hard to make the gun unsafe grinding on the external trigger surfaces. Go ahead and try it.

[RLS]

Try using sand paper on the sharp edges, round them. Use a small block of wood or dowel wrapped in the sand paper. I did an SP101 using that method. If I recall correctly, I used 220 grit. Go slow.

Rick

[bogey1]

Day ja vu.

[icp4life162005]

Day ja vu.

Deja vu indeed.