Results 61 to 70 of 79
-
October 1st, 2022, 10:33 AM #61
-
October 22nd, 2022, 10:14 AM #62
Re: Need Input for Building a Round
I've gotten myself enough of other peoples' reloads that it's time to process them. I will not shoot them, as I would not provide mine for other people to shoot. The question that I have is...after disassembly and if they fit into my chamber, should I used the primers that are in them or should I knock them out and use my own? And on that note, what do yous do about getting those primers out?
Gender confusion is a mental illness
-
October 22nd, 2022, 10:22 AM #63
Re: Need Input for Building a Round
I push out live primers Slow and easy.. and reuse them.. safety glasses and just go slow
-
October 22nd, 2022, 10:28 AM #64
-
October 22nd, 2022, 10:37 AM #65
Re: Need Input for Building a Round
( I would think) ..You would still need to resize the brass... the neck at least , for neck tension remove the decapping pin from your resizing die and run a piece of brass through it and see how that works for you ?
Im sure someone with more experience will come a long !
-
October 22nd, 2022, 10:38 AM #66
-
October 22nd, 2022, 10:43 AM #67
-
October 22nd, 2022, 10:54 AM #68
Re: Need Input for Building a Round
Just FYI, I know you shoot the 200 and 225gr, I saw these on American, about 70cpr after coupon code.
https://americanreloading.com/338-ca...ond-100ct.htmlSigGendered
-
October 22nd, 2022, 11:33 AM #69
Re: Need Input for Building a Round
Thanks. I'm trying to build myself an accurate round with components that will be around for a while so I don't have to keep reworking it. The Hornady bullits that I have are running low and I'm not finding them anywhere. I did find two others that hopefully won't dry up on me to work with. IMR 4831 is hard to find but H4831SC is floating around right now. I have been working with the IMR and have secured enough to last me a little while and I scrounged up enough of the HSC to pick up from there to probably last as long as I do. If I find one of the two bullits that I got works well, I'll try go get a good supply of them. If I can't, then it's back to the drawing board.
Gender confusion is a mental illness
-
November 12th, 2022, 11:48 AM #70
Re: Need Input for Building a Round
Next question:
I was unable to find the Hornady bullets I was using and got some Speer and Barnes to test for accuracy. Hopefully, they will both still be available after testing and I can get a heap of them. Both are 225 grain but their dimensions (lengths) are not the same. I am not finding data specific to these bullets and am seeking the best way to work with them. In lieu of any information, I'll start with the minimum published load that I have and see what I get. Any ideas/input?Gender confusion is a mental illness
Similar Threads
-
Need Some Input!
By RBA02 in forum GeneralReplies: 35Last Post: April 13th, 2013, 05:09 AM -
Thinking of Building an AR any input?
By DoubleSawbuck in forum RiflesReplies: 4Last Post: July 26th, 2012, 09:17 PM -
Need input on Glock 9 mm Scherer 31 round mags.
By bripro in forum PistolsReplies: 5Last Post: April 27th, 2012, 01:57 AM -
OK so how about a little LEO input...
By Snert in forum GeneralReplies: 11Last Post: November 9th, 2009, 09:24 PM
Bookmarks