Results 1 to 10 of 11
Thread: .30-06 for M1 Garand
-
July 7th, 2021, 03:28 PM #1Junior Member
- Join Date
- Aug 2018
- Location
-
Bethlehem,
Pennsylvania
(Lehigh County) - Posts
- 2
- Rep Power
- 0
.30-06 for M1 Garand
I recently acquired my first Garand from CMP and am looking forward to taking it to the range. Does anybody have good leads on where to get Garand-compatible .30-06? It seems like a lot of surplus has dried up. Any sources online or in Eastern PA would be appreciated.
-
July 7th, 2021, 04:57 PM #2
Re: .30-06 for M1 Garand
Generally speaking, any Civvie 150 grain FMJ that is not labeled "high velocity" ect..(the cheap stuff ) will work. Norma, American Eagle and some others sell factory ammo labeled for M1Garand use
Yes the MilSurp is getting harder to find and spendy as is the enblocks, I rember them for less than 25 cents, they are at some shows for $2 +
great site for all things Garand and thier prices have not gone full retard
https://ammogarand.com/
Enjoy the rifle, you chose wisely....and one more caveat, it almost never makes it on to the Lefty banners list of evil riflesLast edited by SgtRecon; July 7th, 2021 at 05:15 PM.
-
July 7th, 2021, 09:25 PM #3Active Member
- Join Date
- Feb 2012
- Location
-
Bethlehem, PA,
Pennsylvania
(Northampton County) - Posts
- 236
- Rep Power
- 9955187
Re: .30-06 for M1 Garand
If you*re in the Lehigh Valley area you can try Sarco. They usually have some Privi Garand safe ammo.
(610) 250-3960
info@sarcoinc.com
-
July 8th, 2021, 07:06 AM #4Senior Member
- Join Date
- Dec 2015
- Location
-
Lock Haven & Southern Ohio,
Pennsylvania
- Posts
- 451
- Rep Power
- 6318624
Re: .30-06 for M1 Garand
On the above post, two days ago I noticed a few PPU "06" unfired cases in the bucket at our range with heavy primer strikes and no ignition. These were newer or new rounds. Looks like PPU has some bad large rifle primers.
Engineers make things idiot proof! Evolution makes better idiots!
-
July 8th, 2021, 07:12 PM #5
Re: .30-06 for M1 Garand
How much do you want to buy?
I'm consolidating my ammo and have more 30-06 than I'll ever use. I have a few cans of genuine USGI Lake City in cartons and a few cases of Danish surplus on clips in bandoleers. This is around 1991 vintage. Very accurate , high-quality stuff. Denmark shipped millions of rounds over when they returned the 40,000 Garands they borrowed. It's non-corrosive , brass-cased , but it is Berdan primed so reloading is not very practical. No shipping , local pick-up only.I don't speak English , I talk American!
-
July 8th, 2021, 07:58 PM #6Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,655
- Rep Power
- 21474846
Re: .30-06 for M1 Garand
Talk to Abner. You need to shoot Grand safe ammo.
Bent oprods are a thing.
if you can't find it here check out the cmp forums. plenty of info on ammo.
-
July 8th, 2021, 09:16 PM #7
Re: .30-06 for M1 Garand
Not exactly the answer you asked for, but one of the aftermarket gas plugs is on my short list once mine arrives. For $30-50 theres a few out there with different functionality claims.
-
July 8th, 2021, 09:52 PM #8Junior Member
- Join Date
- Aug 2018
- Location
-
Bethlehem,
Pennsylvania
(Lehigh County) - Posts
- 2
- Rep Power
- 0
Re: .30-06 for M1 Garand
Thanks for all the great info, all. Definitely trying to avoid a bent op rod or anything dangerous, so I appreciate the tips and leads.
Abner, i sent you a private message!
-
July 8th, 2021, 10:11 PM #9
Re: .30-06 for M1 Garand
I don't speak English , I talk American!
-
July 9th, 2021, 03:11 PM #10
Similar Threads
-
m1 garand
By richy2kool in forum GunsmithingReplies: 20Last Post: January 26th, 2011, 06:21 PM -
M1 Garand
By Spike71 in forum GeneralReplies: 23Last Post: January 3rd, 2009, 11:46 AM -
WTS. Winchester M1 garand, HRA garand
By bthwb in forum GeneralReplies: 0Last Post: October 14th, 2008, 06:33 PM
Bookmarks