help with finding a suppressor adapter.

[bacher2741]

I have a hunter arms Kestral 762 AK suppressor. it uses a bushing to adapt to different barrel threads.

I believe the outside male thread is M25 and I need the inside to be 5/8 x 24 for my 300blk barrel threads.
I reached out to the manufacturer and have not heard back. I know I bought a bushing for my AR threads several
years ago but can't find a source for the 300blk threads size now.

Hoping someone has some experience with this and can help me find an inexpensive solution.


compressed.jpg



Thanks
bacher2741

[Xringshooter]

Have you checked with Huntertown Arms? http://www.huntertownarms.com/k762ak.php

[JoshIronshaft]

I believe they are closed for good.

I have the same can.

Find a machine shop or competent gunsmith near you to machine what you need. Double check their work by bore sighting or using a bore rod. If you work with someone without the proper ATF licensing you won’t be able to leave the can with them, just to state the obvious. They will have to fit and finish the threads while you hang around.

[bacher2741]

I just need to leave them the bushing I already have and they can duplicate it with the required internal threads. 5/8"x24. thanks for the response. I was hoping to just buy an already made bushing but its very difficult to find.

[Gunplummer]

JoshIronshaft has a point. You have to have very good alignment. Saw one after a bullet tumbled through a suppressor once.