Results 1 to 5 of 5
-
April 23rd, 2021, 01:21 PM #1
help with finding a suppressor adapter.
I have a hunter arms Kestral 762 AK suppressor. it uses a bushing to adapt to different barrel threads.
I believe the outside male thread is M25 and I need the inside to be 5/8 x 24 for my 300blk barrel threads.
I reached out to the manufacturer and have not heard back. I know I bought a bushing for my AR threads several
years ago but can't find a source for the 300blk threads size now.
Hoping someone has some experience with this and can help me find an inexpensive solution.
compressed.jpg
Thanks
bacher2741EB EVO KC9, Kimber SS Raptor Pro II,
Sig 226 Legion, Wilson Combat Supergrade
-
April 23rd, 2021, 02:40 PM #2
Re: help with finding a suppressor adapter.
Have you checked with Huntertown Arms? http://www.huntertownarms.com/k762ak.php
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
April 25th, 2021, 10:21 PM #3
Re: help with finding a suppressor adapter.
I believe they are closed for good.
I have the same can.
Find a machine shop or competent gunsmith near you to machine what you need. Double check their work by bore sighting or using a bore rod. If you work with someone without the proper ATF licensing you won’t be able to leave the can with them, just to state the obvious. They will have to fit and finish the threads while you hang around.
-
May 4th, 2021, 08:24 AM #4
Re: help with finding a suppressor adapter.
I just need to leave them the bushing I already have and they can duplicate it with the required internal threads. 5/8"x24. thanks for the response. I was hoping to just buy an already made bushing but its very difficult to find.
EB EVO KC9, Kimber SS Raptor Pro II,
Sig 226 Legion, Wilson Combat Supergrade
-
May 5th, 2021, 07:02 PM #5Super Member
- Join Date
- Oct 2012
- Location
-
Jim Thorpe,
Pennsylvania
(Carbon County) - Posts
- 675
- Rep Power
- 2079673
Re: help with finding a suppressor adapter.
JoshIronshaft has a point. You have to have very good alignment. Saw one after a bullet tumbled through a suppressor once.
Similar Threads
-
Making a suppressor adapter for a Tantal
By GonzoGeezer in forum GunsmithingReplies: 11Last Post: July 29th, 2020, 08:07 PM
Bookmarks