Pennsylvania Firearm Owners Association
Page 1 of 4 1234 LastLast
Results 1 to 10 of 37
  1. #1
    Join Date
    Jun 2010
    Location
    SWPA, Pennsylvania
    (Allegheny County)
    Posts
    1,215
    Rep Power
    21474851

    Default Leaked ATF Documents Upcoming Proposed Regulation Changes

    Via The Reload (https://thereload.com/leaked-atf-doc...an-ghost-guns/)

    An internal Department of Justice document explaining how the Biden Administration plans to restrict so-called ghost guns was leaked on Tuesday.

    The 107-page document, obtained by The Reload, outlines changes the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) wants to make to outlaw the sale of homemade gun kits by unlicensed manufactures. At the direction of President Joe Biden, the agency plans to propose federal rule changes, which would require anyone selling unfinished firearms receivers to obtain a federal license and mark the parts with a serial number. Anyone who continues to sell unfinished receivers without a license could face federal felony charges.

    April Langwell, chief of the ATF’s Public Affairs Division, neither confirmed nor denied the document’s authenticity. She told The Reload she could not “comment on internal communications or deliberations on potential or hypothetical rulemakings.”

    The document reworks and broadens the definition of what parts constitute a regulated firearm receiver. It then says any unfinished part that “may readily be converted” into a receiver must be treated as a receiver and requires sellers to obtain federal licenses, mark the unfinished parts with serial numbers, and perform background checks on buyers. The proposal provides only subjective standards for what makes an unfinished part “readily” convertible into a finished firearm but provides footnotes to court cases where the term has been applied. One court example included in the document said a part completed in “around an eight-hour working day in a properly equipped machine shop” was considered “readily” convertible. The only example of a ruling defining when a part is not “readily” convertible involved a process that “required [a] master gunsmith in a gun shop and $65,000 worth of equipment and tools.”

    The examples provided in the document show the proposed rule would likely outlaw the sale of any unfinished receiver, especially when included in a kit with other parts and instructions or tools needed to complete the part. That’s because most unfinished parts sold in America today, including so-called 80% AR-15 lowers, can be finished at home in a few hours with commonly available tools like drill presses and compact mills.

    The ATF said in the proposal it expects the rule will have a “significant impact” on companies currently selling unfinished receivers, but it expects them to adapt to the new rule.

    “Based on current marketing related to the unregulated sale of certain firearm parts kits, ATF anticipates that these non-FFLs would either become FFLs or would take a loss in revenue to sell a parts kit that does not contain a frame or receiver, or simply sell the frame or receiver, but not both,” the document said.

    The full proposal won’t be made public for another two weeks, and details could change between now and then. However, the draft is in line with comments made by President Biden when he directed the DOJ to make new rules outlawing the sale of so-called ghost gun kits on April 8.

    “I want to see these kits treated as firearms under the Gun Control Act, which is going to require that the seller and manufacturers make the key parts with serial numbers and run background checks on the buyers when they walk in to buy that package,” Biden said in a speech at the White House.

    The document also lays out plans to broaden and update the federal definition of firearms receiver to correct a problem with the ATF’s interpretation of the current definition. Courts have begun questioning the ATF’s long-running determination that an AR-15 lower is a receiver despite not including several of the parts required in the current definition. Prosecutors have been forced to drop cases involving the ATF’s determination in recent years.

    The ATF admitted in the document that “neither the upper nor the lower portion of a split/multi-piece receiver firearm alone falls within the precise wording of the regulatory definition” but lashed out in the document at the “erroneous district court decisions” that employ a “narrow interpretation” of the definition.

    “These courts’ interpretation of ATF’s regulations, if broadly followed, could mean that as many as 90 percent of all firearms now in the United States would not have an identifiable frame or receiver,” the document said. “Those firearms would include numerous widely available models, such as Glock-type and Sig Sauer P32013 pistols, that do not utilize a hammer – a named component – in the firing sequence.”

    The ATF said it is necessary to update the definition of a receiver to ensure it won’t “be misinterpreted by the courts, the firearms industry, or the public at large to mean that most firearms in circulation have no part identifiable as a frame or receiver.” The proposed receiver definition would only require one fire control component, such as a trigger mechanism, cylinder, or firing pin, instead of requiring multiple parts as the current definition does. The ATF said it plans to keep in place the determinations on which specific parts qualify as receivers for guns currently on the market and create a voluntary process for gun makers to submit new designs for determinations.

    The document also proposes the creation of a definition for “privately made firearms,” which would apply to any gun without a serial number made by somebody who doesn’t have a federal gun-making license. Making guns at home for personal use with devices like 3D printers will not be affected by the definition. However, any privately made firearm sold to a licensed gun dealer would be required to be permanently marked with a serial number by the dealer before it could be sold.

    The proposal goes on to suggest several other rule changes. It would change how silencers are regulated by requiring only the outside tube to be serialized instead of each individual part. It would also require licensed gun dealers keep background check records beyond the current 20-year deadline and allow gunsmiths to make serial markings on privately made firearms.

    The Department of Justice has until May 8 to publish the ATF’s suggested rule changes. The proposal will be open to public comment for 90 days after publication.
    F*#K THE ATF

  2. #2
    Join Date
    Feb 2012
    Location
    Bethlehem, PA, Pennsylvania
    (Northampton County)
    Posts
    233
    Rep Power
    9955187

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    If this rule is enacted as currently written the 80% market will collapse (the true intention) as the whole point of making one is so the government doesn*t know who has them. The main benefit of the 80% will be nullified and the cost difference won*t be enough to keep manufacturers afloat.

    Stuart

  3. #3
    Join Date
    Jul 2013
    Location
    Mohnton, Pennsylvania
    (Berks County)
    Posts
    7,194
    Rep Power
    21474854

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Actually some people are craftsmen and like the work. People don't do pottery because the government tracks pots.
    The Gun is the Badge of a Free Man

  4. #4
    Join Date
    Jan 2016
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    1,650
    Rep Power
    21474846

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Who needs ghost guns anyway.
    Ive been alive gor 58 years and I've never seen a ghost.

  5. #5
    Join Date
    Mar 2009
    Location
    Philly Burbs, Pennsylvania
    (Bucks County)
    Posts
    839
    Rep Power
    21474852

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Everyone just needs to stop complying. Serial numbers are infringing. The ATF is an infringement.

  6. #6
    Join Date
    Jun 2010
    Location
    North Penn area, Pennsylvania
    Age
    64
    Posts
    4,664
    Rep Power
    21474854

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Are VINs on motor vehicles infringing? Serial numbers on appliances and electronics?

    Serial numbers were not federally required on firearms till 1968. We're you protesting back then?
    I don't speak English , I talk American!

  7. #7
    Join Date
    Apr 2007
    Location
    Bucks Cty, Pennsylvania
    (Bucks County)
    Age
    70
    Posts
    6,011
    Rep Power
    21474859

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Quote Originally Posted by steve_010 View Post
    Everyone just needs to stop complying. Serial numbers are infringing. The ATF is an infringement.
    Agreed, but from my vantage point, Americans are complying to all government edicts. Pretty soon they be taking a train
    Its easier to fool people than to convince them they've been fooled....Mark Twain

  8. #8
    Join Date
    Feb 2008
    Location
    Loami, Illinois
    Age
    82
    Posts
    1,541
    Rep Power
    21474854

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Quote Originally Posted by DukeConnor View Post
    Who needs ghost guns anyway.
    Ive been alive gor 58 years and I've never seen a ghost.
    GROAN!!!!! LOL
    Courage is being scared to death--but saddling up any way. John Wayne

  9. #9
    Join Date
    Mar 2013
    Location
    Erwinna, PA
    Posts
    609
    Rep Power
    21474848

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    79% receivers, anyone?

    Seriously, unless they ban the possession of aluminum (admittedly, not hard at today's prices), they can't stop people from "manufacturing" receivers. They may be successful in preventing people from having AR-15 lowers made at home, but that just means a gun they didn't think to ban by name will become popular next.

    At the end of the day, a gun is just a steel tube that's closed on one end. The mechanism for closing the end differs between firearms, but none of it is rocket science- just simple applications of kinematics and basic fabrication techniques. People in third-world countries have been making guns in caves with dirt floors for centuries, and this will continue with or without Biden writing rules about which holes in said chunk of aluminum are allowed.

    I'm not gonna post any citations because with 30 seconds on Google Images you can find more examples than you could ever need to see.

    Enforcement of any rules, however, is a different story. If their recent handling of things such as the so-called "insurrection" are any indication, gun laws will increasingly be enforced NJ/DC style, where anyone found with a gun is guilty of a serious crime until they can prove they qualify for an exception to the blanket ban on guns.
    They even have minds but do not think. -Dov Fischer

  10. #10
    Join Date
    Mar 2013
    Location
    Erwinna, PA
    Posts
    609
    Rep Power
    21474848

    Default Re: Leaked ATF Documents Upcoming Proposed Regulation Changes

    Just another thought related to the above:

    Wear a flat-brim hat and/or basketball shorts when doing anything with guns. Bingo, instant immunity from prosecution.
    They even have minds but do not think. -Dov Fischer

Page 1 of 4 1234 LastLast

Similar Threads

  1. Replies: 84
    Last Post: March 28th, 2018, 10:32 AM
  2. Leaked: Glock 46
    By Bang in forum Pistols
    Replies: 17
    Last Post: October 1st, 2017, 04:02 AM
  3. Stewartstown Gun regulation?
    By NRA Member in forum General
    Replies: 0
    Last Post: January 28th, 2013, 11:54 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •