Results 1 to 9 of 9
Thread: LR-308 Buffer Question
-
April 17th, 2021, 12:26 PM #1
LR-308 Buffer Question
I have an 18” mid length heavy barrel with a non adj gas block, with a a 3.8 oz carbine buffer. It functions fine but ejects the brass like a lawn sprinkler in a 15 foot arc.
I think a heavier buffer might cushion the BCG better. There aren’t many choices between 3.8 and 5.3oz. Would a 5.3 oz be too heavy?
Please don’t recommend a $100+ option. I’ve spent enough on this one as it is.Accuse your enemy of what you are doing as you are doing it to create confusion -Karl Marx
-
April 17th, 2021, 01:23 PM #2
Re: LR-308 Buffer Question
It functions fine,I don't speak English , I talk American!
-
April 17th, 2021, 01:34 PM #3
Re: LR-308 Buffer Question
Accuse your enemy of what you are doing as you are doing it to create confusion -Karl Marx
-
April 17th, 2021, 02:13 PM #4
Re: LR-308 Buffer Question
My LR-308 has a 24in heavy stainless barrel and whatever buffer came in it. Never notice the bolt/carrier hitting 'hard'. It does throw the spent brass.
LR at range.jpg
I have a net I use at the bench I made from 3/8x3ft long steel rods welded to 2 clamps with a crosspiece I drape a hunk of GI surplus camo net over. Kinda like a 3ftx3ft ping-pong table net. Works wellI don't speak English , I talk American!
-
April 17th, 2021, 02:58 PM #5
Re: LR-308 Buffer Question
I think the rifle length usually go with the long buffers and tube. From what I’ve read, on an 18” mid length, a heavy carbine buffer with a .308 spring is the way to go. .308 ARs are still new to me.
Recoil isn’t bad and it seems to function fine. The spent brass looks almost new, despite being launched a few yards across the rocks. I think it could benefit from a heavier buffer. I might just try one for the hell of it.Accuse your enemy of what you are doing as you are doing it to create confusion -Karl Marx
-
April 17th, 2021, 08:47 PM #6
Re: LR-308 Buffer Question
I put this in a AR10 18" mid length that was also throwing brass into the next county, It tamed it down nicely at the heaviest weight
https://www.joeboboutfitters.com/Odi...s-abs-ar10.htm
Check your bolt lugs often, the short barrel/gas system AR10's can wear them prematurely, my opinion is most production rifles are overgassed slightly
-
April 17th, 2021, 09:17 PM #7Active Member
- Join Date
- May 2009
- Location
-
Pacific NW,
Oregon
- Posts
- 109
- Rep Power
- 302699
Re: LR-308 Buffer Question
A 5.3oz 2.5" 308 carbine buffer probably won't be to heavy.
https://www.midwayusa.com/product/1021956650?pid=724762
But... I am going to have to say ,IMHO, an adj. GB would be a better solution. As in save up for one if needed.
All my Large Frame AR's use them. 308, 6.5CM , various gsa lengths and barrel lengths.
The Aero Precision Adj. GB is a value, with many preferred features.
https://www.primaryarms.com/aero-pre...file-gas-block
-
April 21st, 2021, 04:00 PM #8Super Member
- Join Date
- May 2018
- Location
-
Philadelphia,
Pennsylvania
(Delaware County) - Posts
- 553
- Rep Power
- 11657996
Re: LR-308 Buffer Question
I*m gonna agree with bfoosh006. Adjustable Gas Block is the way to go. I*ve used adjustable GB*s on EVERY build I*ve done since 2014 (more than a few!)and I*ve used the same kind on the last 4 or 5. I came across and started using the Wojtek clamp on adjustable GB*s. They are actually sold by several manufacturers.
Made from 1018 steel and Nitride treated. Work great, and the price is perfect, because money isn*t wasted on a NAME or O LOGO*s. Pick up one of these and your overgassing problem will be over.
Remember Biden the Pedophile! https://www.youtube.com/watch?v=uSRqaO6DXcA
-
May 11th, 2021, 05:20 PM #9Grand Member
- Join Date
- Jul 2020
- Location
-
Child of the corn,
Pennsylvania
- Posts
- 1,271
- Rep Power
- 21474841
Re: LR-308 Buffer Question
Slash’s heavy buffer and spring. I run it in my 18” DMR build. Cuts recoil significantly and reduces wear on the rifle/receiver. There are reports out there that the DPMS 308 rifles were breaking parts due to the light buffer and overgassing shortly after purchasing new.
Heavybuffers.com, Clint is a stand up guy and will ship immediately. Highly recommend him.
Its $100 option but well worth it . Combined with an adjustable block, i am shooting factory 308 loads and the rifle recoils like a 9mm PCC. Surplus 7.62 ammo recoils like a 22lr (a good compensator also helps with this too...)
Similar Threads
-
ar-15 buffer question
By MTechnik in forum GeneralReplies: 11Last Post: November 15th, 2013, 11:42 PM -
Odd question regarding AR-57 and AR-15 buffer/spring ...
By adoddere in forum RiflesReplies: 9Last Post: October 2nd, 2012, 05:35 PM -
AR-15 Buffer Question
By palawstudent in forum RiflesReplies: 5Last Post: September 9th, 2012, 12:15 PM -
AR-15 Buffer retainer pin question
By afultz075 in forum RiflesReplies: 9Last Post: May 28th, 2012, 11:04 PM
Bookmarks