Results 1 to 10 of 36
-
January 28th, 2021, 10:58 AM #1
What's the "best value" to get into reloading?
Relative statement here I'm sure, but I'm in a spot where I dont currently have space to reload nor the time to do it...but I'd like to start getting the equipment together awhile 1) jic and 2) so when I do get time and space, I have it. I have a quality press, but need most everything else (cleaner, trimmer, dies, powder measure, manuals, etc.). I wont say I'm looking to get the cheapest stuff per se, but rather a good value. i.e. if I can get top tier stuff used for 50% of new, that's great. If used doesnt depreciate and new makes more sense, also fine.
Thoughts on new vs. used? If used, Ebay, local auctions, etc.? Ebay seems high to me lately, but again, I'm a novice and not sure of those prices are being inflated in the same way ammo is. Was at a good local sale back in summer and prices seemed very very reasonable, but I wasnt in the market at that time. If buying new, is it better to buy ala carte or as a kit? Does the stuff ever go on sale, or just is what it is? I have time and can wait for a sale if it's likely to happen.
-
January 28th, 2021, 11:05 AM #2Grand Member
- Join Date
- Aug 2014
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,083
- Rep Power
- 20694360
Re: What's the "best value" to get into reloading?
I've bought most of my stuff used, or at least on the secondary market. Fact of the matter is, a lot of people get a reloading setup thinking they'd be super into it, find out it's not for them, then sell their stuff for a decent discount.
-
January 28th, 2021, 12:11 PM #3Grand Member
- Join Date
- Apr 2007
- Location
-
Pennsyltucky,
Pennsylvania
- Posts
- 8,076
- Rep Power
- 21474861
Re: What's the "best value" to get into reloading?
Well gun shows were a good value the past couple years. I doubt that is the case now.
Ironically I opted to start reloading because during the Obama shortages reloading components were still available here and there and were the first to return with fairly normal prices.
So much for that plan
You have the press, so the other items can be picked up. New vs used isn't a huge issue. I would start grabbing as much as you can, as soon as you can, wherever you can. I stick with RCBS, and Hornady. Spend the extra and buy carbide dies for your handgun calibers.
ETA: Since you are starting from scratch I wouldn't be buying components unless you stumble onto a great deal. Focus on the tools you need. JMOFUCK BIDEN
-
January 28th, 2021, 09:12 PM #4
Re: What's the "best value" to get into reloading?
I would say buy components if you can find them personally. I still find powder at $25/lb or $165/8lbs and 9mm/223 projectiles at 9 cents each. That's still not too shabby and may not be there when you need them. Primers forget it.
Gunowner99 - NRA Benefactor Life Member
-
January 28th, 2021, 09:32 PM #5
Re: What's the "best value" to get into reloading?
I live my life in the gutter and only own Lee reloading equipment.
"It seems that the Constitution is more or less guidelines than actual rules"
My feedback: http://forum.pafoa.org/showthread.php?t=305685
-
January 28th, 2021, 09:38 PM #6Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,650
- Rep Power
- 21474846
-
January 28th, 2021, 09:39 PM #7
Re: What's the "best value" to get into reloading?
I just got a killer deal from a Pafoa Friend... all used but EVERYTHING I need to get started.. EVERYTHING. Powder/ Primers/ Bullets etc.etc.. A few other reloading friends helped out with some brass & Bullets.. Helps to know someone !! I added a hand primer from another member here
-
January 28th, 2021, 09:40 PM #8
-
January 28th, 2021, 09:55 PM #9Super Member
- Join Date
- Apr 2011
- Location
-
Erie,
Pennsylvania
(Erie County) - Posts
- 579
- Rep Power
- 17415803
Re: What's the "best value" to get into reloading?
Dillon hands down is the best bang for your buck. They have a no questions asked life time warranty
We the people love our country so let the government fear us.
-
January 28th, 2021, 10:09 PM #10
Re: What's the "best value" to get into reloading?
Lee and Lyman are affordable reloading options. Between the two they make everything you need. I still use Lee dies for 45/70 and M1 Carbine. I have a little higher end dies for 223 and 45acp. I use older Lyman dies for 38 special. Primers are going to be the sticking point no matter which reloading equipment you buy though. As the President of Federal ammo said in his last video the primers are for the ammunition the factory loads and there's none to spare for the reloading market. Get a Lyman Reloading manual and read about the process of reloading ammo before you make any decisions. It is the most educational manual on the market from beginning to end.
Corruption is the default behavior of government officials. JPC
Similar Threads
-
reloading for bolt action "tactical" rifles...also component sourcing
By glocke12 in forum Ammunition & ReloadingReplies: 10Last Post: April 18th, 2013, 08:00 AM -
Convince me to "pull the trigger" on reloading *update 1 on first page*
By Connal in forum Ammunition & ReloadingReplies: 24Last Post: January 14th, 2012, 11:01 PM -
Midway Sale - Nosler Book "Reloading Guide #6" Reloading Manual
By soberbyker in forum GeneralReplies: 1Last Post: February 19th, 2008, 04:30 PM
Bookmarks