Results 11 to 12 of 12
Thread: 9mm projectiles
-
January 15th, 2021, 05:36 PM #11
Re: 9mm projectiles
Near as I can guesstimate the chamber is a bit tight. I've tried cast lead truncated cone and round nose and always the same story, A time or two they were jammed so tight in the chamber I had to dismount the barrel and drive the cartridge out. Happily for me, they work just fine in my 986, which is a piece that is really growing on me. I wish S&W would make one in N frame so we could get an 8 or 9 round chamber!
"Those who can make you believe absurdities can make you commit atrocities".
-
January 15th, 2021, 08:22 PM #12
Re: 9mm projectiles
I had that issue with an AR9 barrel. My coated bullet reloads were working fine in everything but if I chambered them in my AR9 they were engaging the rifling and if I wanted to remove a live road it was a problem. Had to drive a few out.
I bought a 9mm throating reamer from Brownells. I couple twists of the wrist and my barrel throat was longer and I have no issues with coated bullets in that barrel tool. Plus another handy tool in the tool box.
Edited to correct finish reamer to throating reamer.Last edited by JoshIronshaft; January 20th, 2021 at 10:23 AM.
In America arms are free merchandise such that anyone who has the capital may make their houses into armories and their gardens into parks of artillery. - Ira Allen, 1796
Similar Threads
-
308 and other projectiles
By benc4liberty in forum GeneralReplies: 0Last Post: December 18th, 2008, 10:41 PM
Bookmarks