Results 1 to 10 of 14
Thread: Tommy Gun Clone
-
January 1st, 2021, 04:22 PM #1Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Tommy Gun Clone
Happy New Year everyone .I have a Tommy gun clone made by Bower Industries out of Arizona .Chambered in 45 acp and It doesn't cycle properly .I am looking for someone that may have one and can send me a picture of the lower internals ,so I can determine what parts mine is missing .
-
January 1st, 2021, 04:54 PM #2Active Member
- Join Date
- Aug 2009
- Location
-
Northampton
(Northampton County) - Posts
- 133
- Rep Power
- 1028469
Re: Tommy Gun Clone
if its a clone, why not just google thompson semi auto in 45 acp? prob get like 2.5 million links pics of evey nook an cranny.
also, every semi auto i have( rifles and pistols) that has had a cycling issue a new mag ( or mag spring)
or new action spring went a long way to fixing the issues.
exatcly how does yours not " cycle properly"?75/15/10
-
January 1st, 2021, 04:57 PM #3
Re: Tommy Gun Clone
Mine has two springs that I can use on my truck. Yours is probable short stroking,
if the springs are anything like mine.
-
January 1st, 2021, 05:24 PM #4Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Re: Tommy Gun Clone
Very little info on the internet about them .As far as cycling ,the hammer hangs up on the safety .This is the area that is missing parts ,spring,? retaining clip? when safety is engaged .
-
January 1st, 2021, 05:26 PM #5Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Re: Tommy Gun Clone
Is it made by Bowers industries ? ..
-
January 1st, 2021, 05:32 PM #6Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Re: Tommy Gun Clone
I have spent the better part of 3 years trying to find info on this rifle . I cant find anyone that owns this model .This is why I asked for a picture of the lower internals .
-
January 1st, 2021, 06:03 PM #7Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Tommy Gun Clone
Happy New Year everyone .I have a Tommy gun clone made by Bower Industries out of Arizona .Chambered in 45 acp and It doesn't cycle properly .I am looking for someone that may have one and can send me a picture of the lower internals ,so I can determine what parts mine is missing .I have been searching off and on for 3 years ,and there is little to no information on the internet about them .The hammer is hanging up on the safety ,this is the are that has the missing ,spring? retaining clip to hold the safety in place when it is off .
-
January 1st, 2021, 06:07 PM #8
Re: Tommy Gun Clone
Yeah...I'm confident that's not a Thompson clone.
It may have a slight resemblance to a Thompson but that's where it ends. Good luck
-
January 1st, 2021, 06:07 PM #9Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Re: Tommy Gun Clone
I edited and cross posted this thread in the gunsmith section ...
-
January 1st, 2021, 06:09 PM #10Junior Member
- Join Date
- Apr 2016
- Location
-
Strattanville,
Pennsylvania
(Clarion County) - Posts
- 10
- Rep Power
- 0
Re: Tommy Gun Clone
I dont have any pictures of it .It closely resembles the Volunteer Arms Commando .
Bookmarks