Results 1 to 10 of 13
-
December 16th, 2020, 06:15 PM #1Active Member
- Join Date
- Apr 2008
- Location
-
Bethlehem,
Pennsylvania
(Northampton County) - Posts
- 219
- Rep Power
- 2584221
Remington 7600 in .243 mag spring
Anyone have any idea where I might be able to find a mag spring for a Remington 7600 short action? I've been googling for a few days now and all that I find listed are out of stock. Remington hasn't been gone that long, there must be some floating around somewhere. Are there any other springs that may work? Appreciate your help.
Smit
-
December 16th, 2020, 08:46 PM #2
Re: Remington 7600 in .243 mag spring
Looks like the Covid run on guns caused a lot of older rifles to get sold from closets and safes, and new buyers found the mags weren't up to snuff ??
You may want to buy a new/spare mag until the springs come back in stock. Midwest and Numrich normally carry the springs.
Even factory mags may be hard to come by, so getting a 10-round Triple-K might be required to get you shooting more than
one round at a time for the time-being..
https://www.gunpartscorp.com/products/929990B
Also FWIW, I've gone into Cabelas many times and gotten Rem7600 mags (both factory and triple-k) off the shelf, but they are
not listed on their web page anywhere... So visiting a few stores personally may prove fruitful ...
-
December 17th, 2020, 07:50 AM #3Active Member
- Join Date
- Apr 2008
- Location
-
Bethlehem,
Pennsylvania
(Northampton County) - Posts
- 219
- Rep Power
- 2584221
Re: Remington 7600 in .243 mag spring
Thanks for your help, may have to settle on the 10 rounder. For now, the search continues.
Smit
-
December 18th, 2020, 10:16 AM #4Super Member
- Join Date
- Jan 2010
- Location
-
Ephrata,
Pennsylvania
(Lancaster County) - Posts
- 640
- Rep Power
- 21474851
Re: Remington 7600 in .243 mag spring
Have you tried www.gunpartscorp.com?
-
December 18th, 2020, 10:24 AM #5
Re: Remington 7600 in .243 mag spring
Did you try them?
https://www.gunpartscorp.com/products/816550C
-
December 18th, 2020, 12:12 PM #6Super Member
- Join Date
- Oct 2012
- Location
-
Jim Thorpe,
Pennsylvania
(Carbon County) - Posts
- 675
- Rep Power
- 2079673
Re: Remington 7600 in .243 mag spring
Try ebay.
-
December 18th, 2020, 12:29 PM #7
Re: Remington 7600 in .243 mag spring
Shirks auction has a 243 magazine going off tomorrow, looks like it might fit. $30 currently. Is online, dont know if they ship. Located of rt81 in Annville area
-
December 18th, 2020, 12:37 PM #8Active Member
- Join Date
- Jul 2011
- Location
-
Leola
- Posts
- 178
- Rep Power
- 5150183
Re: Remington 7600 in .243 mag spring
Mid West Gun Works lists the 7600 mag spring but is out of stock.
https://www.midwestgunworks.com/page/mgwi/prod/f19639
But, the link gives a code for the spring Code: F19639.
This place has two mag springs in inventory with the same code number.
https://store.gravelagency.com/defen...agazine+spring
Remington®
F19639 : MAGAZINE SPRING
$7.27
Qty: 2
-
December 18th, 2020, 02:18 PM #9
-
December 18th, 2020, 05:42 PM #10Active Member
- Join Date
- Jul 2011
- Location
-
Leola
- Posts
- 178
- Rep Power
- 5150183
Re: Remington 7600 in .243 mag spring
Well that sucks.
Bookmarks