Results 1 to 4 of 4
Thread: Trigger advice needed
-
November 25th, 2020, 10:16 AM #1Active Member
- Join Date
- May 2018
- Location
-
Snack Capital of the US,
Pennsylvania
(York County) - Posts
- 158
- Rep Power
- 5521017
Trigger advice needed
Was sighting in my Winchester Model 94 yesterday. Really, just brushing up as I have been shooting it for a while. For some reason unbeknownst to me, I noticed that the trigger pull has become very sensitive,
I cock the hammer, pull the lever up to contact the safety button, and just have to touch the trigger to discharge the round. My SAKO had a trigger pull of 3.5 pounds. This seems to be such less.
I am not happy about this!!! GRRRR
I am hoping there might be some way to remedy this without expensive smithing. Any ideas out there?
-
November 25th, 2020, 10:29 AM #2
Re: Trigger advice needed
Just as a troubleshooting start. Cock it using the lever and then pull the hammer back until it stops and let it go forward until it stops. Then pull the trigger and see what happens. It may be that when you cock it, the hammer isn't completely engaging correctly.
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
November 25th, 2020, 11:04 AM #3Active Member
- Join Date
- May 2018
- Location
-
Snack Capital of the US,
Pennsylvania
(York County) - Posts
- 158
- Rep Power
- 5521017
-
November 25th, 2020, 05:47 PM #4Grand Member
- Join Date
- Oct 2009
- Location
-
Chalfont,
Pennsylvania
(Bucks County) - Posts
- 2,418
- Rep Power
- 21474853
Re: Trigger advice needed
If you remove the stock, you can see pretty well into what's happening with the trigger.
Crusader's local #556 South Central Asia chapter
Similar Threads
-
advice needed
By gracenrich in forum PistolsReplies: 4Last Post: January 16th, 2018, 07:17 PM -
Which .380 should I keep? Advice needed.
By American1776 in forum PistolsReplies: 21Last Post: July 23rd, 2015, 12:26 PM -
Advice needed re How to buy and use gun
By claudia077 in forum GeneralReplies: 12Last Post: August 22nd, 2009, 12:51 PM
Bookmarks