Pennsylvania Firearm Owners Association
Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2009
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    1,317
    Rep Power
    6492605

    Default Cz75d pcr loaded chamber indicator spring

    Thoroughly cleaned my cz75d pcr. The loaded chamber indicator wasn't functions very well. I wasn't getting jams but it wasn't really indicating.

    I removed the nut and to my surprise, the spring that operates the plunger was completely mangled. Into the trash. Now i need a replacement.

    Any ideas? Cz's site is down for maintenance, cajun gun works doesn't have one, and none of the other usual sources do either.

    I suppose i could just leave it out. It just might not reset on an empty chamber or if it gets dirty.

    -Zach

  2. #2
    Join Date
    Feb 2009
    Location
    Grove City, Pennsylvania
    (Mercer County)
    Posts
    216
    Rep Power
    3381460

    Default Re: Cz75d pcr loaded chamber indicator spring


  3. #3
    Join Date
    Mar 2009
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    1,317
    Rep Power
    6492605

    Default Re: Cz75d pcr loaded chamber indicator spring

    Quote Originally Posted by rellisonii View Post
    Thank you! I looked on there earlier with the interactive schematic and i couldn't get it to come up.

    -Zach

  4. #4
    Join Date
    Feb 2016
    Location
    Not your neighbor, Pennsylvania
    (Washington County)
    Age
    29
    Posts
    383
    Rep Power
    5633369

    Default Re: Cz75d pcr loaded chamber indicator spring

    Mine has never worked on my pcr. Just removed it. Not a big deal to me. Works perfect with out.

    Never really see the point in them anyways. Should know if it's loaded or not regardless.

  5. #5
    Join Date
    Feb 2010
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    8,283
    Rep Power
    21474855

    Default Re: Cz75d pcr loaded chamber indicator spring

    Don't bother with Thornridge Hardware....oddly, they don't have any springs.

    To replace a spring, measure the wire thickness, the diameter formed by the coils, find the space between coils and calculate the length.

    The Mosin M44 I have had a wrong firing pin spring in it. .062" wire instead of .052", 25 coils instead of 34, length was close to correct. I learned the correct wire from searching Mosin posts, and the correct number of coils by bringing up the part and counting the coils pictured. Sarco showed the correct number of coils in their online photo, so I ordered from them. I now have the correct spring.


    Ooops...I see you have it.
    Constitutional recognition of gun rights has become Demoncratted

  6. #6
    Join Date
    Mar 2009
    Location
    Levittown, Pennsylvania
    (Bucks County)
    Posts
    1,317
    Rep Power
    6492605

    Default Re: Cz75d pcr loaded chamber indicator spring

    Quote Originally Posted by Bang View Post
    Don't bother with Thornridge Hardware....oddly, they don't have any springs.

    To replace a spring, measure the wire thickness, the diameter formed by the coils, find the space between coils and calculate the length.

    The Mosin M44 I have had a wrong firing pin spring in it. .062" wire instead of .052", 25 coils instead of 34, length was close to correct. I learned the correct wire from searching Mosin posts, and the correct number of coils by bringing up the part and counting the coils pictured. Sarco showed the correct number of coils in their online photo, so I ordered from them. I now have the correct spring.


    Ooops...I see you have it.
    I'm actually waiting on it. If i can get it from cz directly, i have a few other parts on my wishlist there. If their site isn't working within the week, I'm going to order from the above link.

    -Zach

Similar Threads

  1. Replies: 1
    Last Post: August 28th, 2020, 10:05 PM
  2. Replies: 11
    Last Post: September 15th, 2010, 08:27 PM
  3. Ruger SR9 Broken Loaded Chamber Indicator
    By Bulldog3071 in forum Pistols
    Replies: 3
    Last Post: March 26th, 2010, 10:09 PM
  4. Carrying a loaded chamber?
    By Kenan in forum General
    Replies: 51
    Last Post: March 24th, 2008, 11:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •