Results 1 to 10 of 42
Thread: Pin & Weld??
-
September 1st, 2020, 11:26 PM #1Member
- Join Date
- May 2012
- Location
-
RDG,
Pennsylvania
(Berks County) - Posts
- 36
- Rep Power
- 0
Pin & Weld??
My understanding is for a 14.5in barrel the break has to be pinned and welded (made permanent) for it to legally pass as a rifle. If this is the case, is there anyone out there in the Berks area or surrounding who can do it or knows of a place that does. Thanks in advance.
-
September 2nd, 2020, 12:44 AM #2Senior Member
- Join Date
- Sep 2011
- Location
-
York,
Pennsylvania
(York County) - Posts
- 252
- Rep Power
- 3124392
Re: Pin & Weld??
The break has to bring the overall length to 16". I think most breaks will put you over that (I know the regular A2 will)
Looking on google, looks like Superior Gunsmithing does pin and welds
-
September 2nd, 2020, 12:52 AM #3
Re: Pin & Weld??
"Brake"... it's a muzzle brake.
Unless it's BROKEN, then...
-
September 2nd, 2020, 06:15 AM #4
Re: Pin & Weld??
The standard A2 flash hider will bring you up about a 1/4" short, you will need one of these if going A2 style :
https://rouschsports.com/shop/muzzle...2-flash-hider/
https://www.rockriverarms.com/index....tegory_ID=1275
-
September 2nd, 2020, 06:20 AM #5
Re: Pin & Weld??
Pistol lower. Done.
Si vis pacem, para bellumμολ ν λαβέWhat country can preserve its liberties if their rulers are not warned from time to time that their people preserve the spirit of resistance? Let them take arms!
-
September 2nd, 2020, 09:00 AM #6Grand Member
- Join Date
- Jan 2016
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 1,658
- Rep Power
- 21474846
Re: Pin & Weld??
Form 1 SBR. Costs 200 bucks and takes a month but then you can do whatever you want with it.
-
September 2nd, 2020, 12:27 PM #7Member
- Join Date
- May 2012
- Location
-
RDG,
Pennsylvania
(Berks County) - Posts
- 36
- Rep Power
- 0
-
September 2nd, 2020, 12:28 PM #8Member
- Join Date
- May 2012
- Location
-
RDG,
Pennsylvania
(Berks County) - Posts
- 36
- Rep Power
- 0
-
September 2nd, 2020, 12:30 PM #9Member
- Join Date
- May 2012
- Location
-
RDG,
Pennsylvania
(Berks County) - Posts
- 36
- Rep Power
- 0
Re: Pin & Weld??
Yea, but I dont wanna be limited to stock options. Not completely out-ruling it if I can get my hands on a nice adjustable brace. Plus, I have no idea what pin and weld cost, i would think it cant be much but if its damn near what the barrel cost it aint happening lol.
-
September 2nd, 2020, 12:38 PM #10Member
- Join Date
- May 2012
- Location
-
RDG,
Pennsylvania
(Berks County) - Posts
- 36
- Rep Power
- 0
Similar Threads
-
AK 74 pin and weld
By red87yj in forum GunsmithingReplies: 3Last Post: May 6th, 2016, 01:32 PM -
Pin and weld
By TheRealDonJohnson in forum RiflesReplies: 8Last Post: August 14th, 2014, 09:13 AM -
Need a gunsmith SE PA to weld on an AK
By joelad in forum GeneralReplies: 4Last Post: July 18th, 2014, 09:58 AM -
JB Weld
By joeyj in forum GunsmithingReplies: 4Last Post: April 11th, 2014, 11:55 PM
Bookmarks