Pin & Weld??

[ykman1]

My understanding is for a 14.5in barrel the break has to be pinned and welded (made permanent) for it to legally pass as a rifle. If this is the case, is there anyone out there in the Berks area or surrounding who can do it or knows of a place that does. Thanks in advance.

[Thrillz]

The break has to bring the overall length to 16". I think most breaks will put you over that (I know the regular A2 will)

Looking on google, looks like Superior Gunsmithing does pin and welds

[Emptymag]

"Brake"... it's a muzzle brake.

Unless it's BROKEN, then...

[SgtRecon]

The break has to bring the overall length to 16". I think most breaks will put you over that (I know the regular A2 will)

Looking on google, looks like Superior Gunsmithing does pin and welds

The standard A2 flash hider will bring you up about a 1/4" short, you will need one of these if going A2 style :

https://rouschsports.com/shop/muzzle...2-flash-hider/

https://www.rockriverarms.com/index....tegory_ID=1275

[Mr_Gixxer]

Pistol lower. Done.

[DukeConnor]

Form 1 SBR. Costs 200 bucks and takes a month but then you can do whatever you want with it.

[ykman1]

The break has to bring the overall length to 16". I think most breaks will put you over that (I know the regular A2 will)

Looking on google, looks like Superior Gunsmithing does pin and welds

Will call, thanks.

[ykman1]

The standard A2 flash hider will bring you up about a 1/4" short, you will need one of these if going A2 style :

https://rouschsports.com/shop/muzzle...2-flash-hider/

https://www.rockriverarms.com/index....tegory_ID=1275

So as long as its 2"+ I should be ok then?

[ykman1]

Pistol lower. Done.

Yea, but I dont wanna be limited to stock options. Not completely out-ruling it if I can get my hands on a nice adjustable brace. Plus, I have no idea what pin and weld cost, i would think it cant be much but if its damn near what the barrel cost it aint happening lol.

[ykman1]

Form 1 SBR. Costs 200 bucks and takes a month but then you can do whatever you want with it.

I may go this route pending on what a pin and weld cost. Just hate waiting.