What did you build yourself

[Ronin]

Here you go, let me know if you have issues with the link. The pictures should be start to finish, the press I picked up for $80, my converted bolt cutter to rivet tool, trigger guard rivet jig pieces x2, barrel pressing jig and examples. I need to make a few more jigs if I do this again or buy them. What I will definitely buy is the receiver drilling template. I thought I had pictures of the spot welder tips I purchased then filed down to fit the rails. I picked up spme steel from my cousin's welding shop and the steel blocks I purchased on ebay for pretty much shipping. https://photos.app.goo.gl/zqbMfEscwmMHAUPD7

Good luck with the build whatever you choose to do with the barrel. The barrel on this was new from Windham for like $120, which was a good deal from what I saw at the time.

Thanks for this!

[HanzMcFeely]

First pic is a mock up. Last pic is the finished (before I start modifying it... )

Specs as it sits in the safe now:

-DPMS LR308 lower build kit (milspec LPK, upgraded for hogue overmolded stock set) from CDNN. Cerakote black graphite
-LJ’s AR parts dpms upper with park’d milspec BCG/forward assist/dust cover
-ER Shaw 18” 416R 1-10” match grade barrel, threaded 5/8”x24, m4 feed ramps
-LJ’s AR parts 15” clamp on free float M-lok hand guard, with 3” under rail
-CMMG SS gas tube, unknown adjustable low profile set screw gas block
-UTG flip up low profile BUIS
-Vortex diamondback 4-12x40 mounted in an eBay 30mm/1” QD PEPR Cantilevered mount
-Vortex Viper 6 MOA red dot
-unknown brand stainless BFC (big f’n compensator, 9 hole, 3”)

Odinworks adjustable buffer en route, as well as YHM gas block, and A2 flash hider. Also on the list is a better charging handle (raptor or Gisselle I’m thinking). Maybe an ambi safety selector and extended mag release, and a B.A.D lever. Eventually a better trigger (echo II or Gisselle)

[HKusp 45]

Just finished the build on this Romanian AK last week. I started it back in September, most of my time was spent making the tooling for it on the weekends.

Ran great at the range and held together, only 40 rounds though, the ammo prices on "range safe" ammo is a bit steep. I can also post some of the jigs I made if anyone's interested. I should see if there's another thread out here showing homemade tools.

20210121_223516 by n3lka, on Flickr

what did you build is not limited to guns brother feel free to post up here as well

[HKusp 45]

First pic is a mock up. Last pic is the finished (before I start modifying it... )

Specs as it sits in the safe now:

-DPMS LR308 lower build kit (milspec LPK, upgraded for hogue overmolded stock set) from CDNN. Cerakote black graphite
-LJ*s AR parts dpms upper with park*d milspec BCG/forward assist/dust cover
-ER Shaw 18* 416R 1-10* match grade barrel, threaded 5/8*x24, m4 feed ramps
-LJ*s AR parts 15* clamp on free float M-lok hand guard, with 3* under rail
-CMMG SS gas tube, unknown adjustable low profile set screw gas block
-UTG flip up low profile BUIS
-Vortex diamondback 4-12x40 mounted in an eBay 30mm/1* QD PEPR Cantilevered mount
-Vortex Viper 6 MOA red dot
-unknown brand stainless BFC (big f*n compensator, 9 hole, 3*)

Odinworks adjustable buffer en route, as well as YHM gas block, and A2 flash hider. Also on the list is a better charging handle (raptor or Gisselle I*m thinking). Maybe an ambi safety selector and extended mag release, and a B.A.D lever. Eventually a better trigger (echo II or Gisselle)

nice ... now I see it all coming together

[HanzMcFeely]

nice ... now I see it all coming together

I see what you did there lol

PRS/LR/Midwest deer stand rifle this is not a carry all day in the woods rifle, damn thing is heavy.

Edit: add a Beatenzone ATCH7 charging handle to the list of parts. The Seekins is too short and hard to manipulate with scope mounted

[HKusp 45]

I see what you did there lol

PRS/LR/Midwest deer stand rifle this is not a carry all day in the woods rifle, damn thing is heavy.

Edit: add a Beatenzone ATCH7 charging handle to the list of parts. The Seekins is too short and hard to manipulate with scope mounted

oh I understand .. .believe me

IMG_20190920_175607414.jpg

[HanzMcFeely]

Nice!

This shit is addicting and expensive... at least i can thank uncle creepy joe for all the free money to build guns

Part of me wants to build a 50 krater upper for this rifle now :think:

[bubbared64]

what did you build is not limited to guns brother feel free to post up here as well

Thanks, I think I already posted pictures of my tools that I built. If I have anymore homebrew builds, I'll be sure to throw them up here.

[Flounder]

here is my home build, STEN MkV in 9mm
This was built on a semi auto Indianapolis ordnance tube and kit with a 16 inch barrel. nice way to kill some time over a cold winter
totally fun build would recommend to any garage builder. Still needs some work like welds cleanup and a cerakote finish. My next build will be a British WWII Sterling in 9mm!
IMG_0143 (sten mkv.jpgstnemkv.jpg

[HKusp 45]

here is my home build, STEN MkV in 9mm
This was built on a semi auto Indianapolis ordnance tube and kit with a 16 inch barrel. nice way to kill some time over a cold winter
totally fun build would recommend to any garage builder. Still needs some work like welds cleanup and a cerakote finish. My next build will be a British WWII Sterling in 9mm!
IMG_0143 (sten mkv.jpgstnemkv.jpg

awesome I love seeing all the not so much normal builds that people do.