Results 1 to 10 of 15
-
June 14th, 2020, 10:58 PM #1
Looking for a decent gun cleaning stand...
Anyone know of a good, solid gun cleaning/maintenance stand/vise out there?
I've seen/played with some cheap, plastic Tipton ones that are a joke, and seen other plastic ones out there as well. I saw one metal stand but it was thin tubing and didn't have any heft to it. Some inertia (mass) to the unit would be nice when driving a roll pin, etc.
Do I need to make my own to have a solid, (relatively) heavy unit? Is there not a demand for this?
I admit, I haven't looked in maybe a year or so.
-
June 30th, 2020, 12:25 AM #2
Re: Looking for a decent gun cleaning stand...
No one???
-
June 30th, 2020, 12:52 AM #3
-
June 30th, 2020, 01:09 AM #4
Re: Looking for a decent gun cleaning stand...
There was a guy here that didn't have a basement or garage, so he did all his maintenance in his kitchen.
The rumor was that when his girlfriend was out he would clamp a 2x8 to his kitchen counter with a generic 40 pound bench vise bolted to it.
Seemed to work pretty well for him, or at least that's what I heard.How can you have any cookies if you don't drink your milk?
-
June 30th, 2020, 04:34 AM #5
-
June 30th, 2020, 07:28 AM #6
Re: Looking for a decent gun cleaning stand...
Not sure what’s wrong with the Tipton models especially for cleaning? There are several different models, they are all somewhat affordable and built well. Most importantly they help to get the job done which is basic maintenance and light repairs.
I have had mine for over a decade and have used it for maintenance and restorations on dozens of firearms using it without ever an issue.Last edited by Hodgie; June 30th, 2020 at 07:33 AM.
-
June 30th, 2020, 07:45 AM #7
Re: Looking for a decent gun cleaning stand...
He's talking about driving in roll pins, like doing a build.
I'm sure there's guys here that can do a build lightly floating on a layer of bubbles, but I hammer that crap all over the place if not bolted down.
Then there's Empty who just parks his truck on a board and then does the rest with a pair of pliers and his sandwich clamps.How can you have any cookies if you don't drink your milk?
-
June 30th, 2020, 07:50 AM #8
Re: Looking for a decent gun cleaning stand...
My mistake. However you use a proper upper and lower jig for that secured in a vise vs a cleaning/maintenance vise for AR builds.
For all non AR firearms a properly made and secured work bench and a gun mat is all that’s required. Worked for a shop with a Smith for years and it’s what was used.Last edited by Hodgie; June 30th, 2020 at 07:53 AM.
-
June 30th, 2020, 07:59 AM #9
-
June 30th, 2020, 02:14 PM #10
Re: Looking for a decent gun cleaning stand...
"Anyone know of a good, solid gun cleaning/maintenance stand/vise out there?"
For AR's there is no "One size fits all" for doing everything you would want to do with an AR. A cleaning stand is just, as was said, something to make cleaning an AR or other rifles easier (the "third hand").
When doing maintenance on an AR there are all kinds of specific jigs that will assist in performing maintenance so that you don't harm your firearm. Go to Brownells and you can see the myriad of different jigs and fixtures that are available. The ones I use the most are the lower receiver holder, the upper receiver action block, a Geissele reaction rod, and an AR bench block. Those and a good bench vise (with various materials (leather, aluminum, etc.) for padding what you secure in the vise) will make maintenance easier.
I have both a Tipton and a MTM cleaning station http://www.mtmcase-gard.com/products...ning-rmc-5.php and they do what they were designed for very well. I even use the Tipton when mounting/boresighting scopes and optics on rifles to take out any human errors that could be introduced.Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
Similar Threads
-
I stand with LaPierre - I stand with FOAC
By thefirstndsecond in forum NationalReplies: 1Last Post: December 4th, 2015, 08:34 PM -
CSpan Stand Your Stand US Senate Hearing and Senator Graham
By steve762 in forum NationalReplies: 2Last Post: November 5th, 2013, 01:09 PM -
Cleaning supplies and cleaning tips for Glock 23?
By BloeJanton in forum GeneralReplies: 13Last Post: June 25th, 2011, 07:16 AM
Bookmarks