Certainly not the most difficult I’ve done, but I am proud of this one. I built this myself, after stripping & “Home Blueprinting” a Savage 10 Action. I had older pics, but recently I machined the new buttstock. My design.

Uses an AR buffer tube. I cut to desired length and had to machine & press in a new mounting lug.


Then I made a new end, & machined slots so it can can’t side to side. The plate to the right is from the old stock I was using.


Used 2024 Billet for the carrier plate of the stock. This pic is after rough machining & marking the attachment points.


Finally, finished, added the spacers and made a Kydex cheer rest. And the entire rifle. Also with new scope, trigger, etc.