Pennsylvania Firearm Owners Association
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Join Date
    May 2018
    Location
    Philadelphia, Pennsylvania
    (Delaware County)
    Posts
    222
    Rep Power
    5755946

    Default My Custom Built Bench Rifle.

    Certainly not the most difficult I’ve done, but I am proud of this one. I built this myself, after stripping & “Home Blueprinting” a Savage 10 Action. I had older pics, but recently I machined the new buttstock. My design.

    Uses an AR buffer tube. I cut to desired length and had to machine & press in a new mounting lug.


    Then I made a new end, & machined slots so it can can’t side to side. The plate to the right is from the old stock I was using.


    Used 2024 Billet for the carrier plate of the stock. This pic is after rough machining & marking the attachment points.


    Finally, finished, added the spacers and made a Kydex cheer rest. And the entire rifle. Also with new scope, trigger, etc.


    Time for “BLM Terrorist Group” Riots to stop! https://www.youtube.com/watch?v=HJEpXxXnfXw

  2. #2
    Join Date
    Jun 2010
    Location
    Eastern PA, Pennsylvania
    (Delaware County)
    Posts
    1,096
    Rep Power
    17291642

    Default Re: My Custom Built Bench Rifle.

    Sweet set up. I like the design of the buttstock...looks super light too.

  3. #3
    Join Date
    Jan 2007
    Location
    Pittsburgh, Pennsylvania
    (Allegheny County)
    Posts
    28,295
    Rep Power
    21474878

    Default Re: My Custom Built Bench Rifle.

    I'm not really sure what I'm looking at, but I like it!
    FOR SALE!!!!! AR15 Package Pittsburgh Click for INFO

  4. #4
    Join Date
    Dec 2016
    Location
    Warminster, Pennsylvania
    (Bucks County)
    Posts
    131
    Rep Power
    2980997

    Default Re: My Custom Built Bench Rifle.

    Very nicely done, kudos to you!

    S’more details please.

  5. #5
    Join Date
    May 2018
    Location
    Philadelphia, Pennsylvania
    (Delaware County)
    Posts
    222
    Rep Power
    5755946

    Default Re: My Custom Built Bench Rifle.

    Yeah, I should have taken more pics. These few just show the basic machining I did to make the individual parts. I started with a stock that already used the buffer tube & the rear plate with the grooves. (The original shoulder rest). But I had to cut the buffer tube and fab that new piece with threaded hole.

    Thank you for the kind words my friends.
    Time for “BLM Terrorist Group” Riots to stop! https://www.youtube.com/watch?v=HJEpXxXnfXw

  6. #6
    Join Date
    May 2018
    Location
    Endless Mountains, Pennsylvania
    Posts
    68
    Rep Power
    1138926

    Default Re: My Custom Built Bench Rifle.

    Just out of curiosity, considering your expertise, time, and materials - what do you think it should sell for if it was ever to be offered???

  7. #7
    Join Date
    Oct 2008
    Location
    USN Retired, Pennsylvania
    (Monroe County)
    Posts
    3,756
    Rep Power
    21474852

    Default Re: My Custom Built Bench Rifle.

    Good Job.
    Owner Trigger Time LLc 01 FFL/SOT Saylorsburg, NRA CRSO/Pistol/Rifle/Shotgun inst.

  8. #8
    Join Date
    May 2018
    Location
    Philadelphia, Pennsylvania
    (Delaware County)
    Posts
    222
    Rep Power
    5755946

    Default Re: My Custom Built Bench Rifle.

    Quote Originally Posted by Hokkmike View Post
    Just out of curiosity, considering your expertise, time, and materials - what do you think it should sell for if it was ever to be offered???
    Are you referring to the stock, or the whole rifle?
    Time for “BLM Terrorist Group” Riots to stop! https://www.youtube.com/watch?v=HJEpXxXnfXw

  9. #9
    Join Date
    Jun 2014
    Location
    Middle of PA, Pennsylvania
    Posts
    7,008
    Rep Power
    21474850

    Default Re: My Custom Built Bench Rifle.

    That looks awesome, great work.

    I almost like it better unfinished though.
    1 Corinthians 1:10..all of you agree with one another in what you say and that there be no divisions among you, but that you be perfectly united in mind and thought.

  10. #10
    Join Date
    Jun 2010
    Location
    warminster, Pennsylvania
    (Bucks County)
    Posts
    2,875
    Rep Power
    21474849

    Default Re: My Custom Built Bench Rifle.

    Does the weight of the stock aid with recoil?
    There is no greater sorrow than to recall in misery the time when we were happy - Dante.

Page 1 of 2 12 LastLast

Similar Threads

  1. Custom Bench Sniper Rifle 308
    By roman3667 in forum General
    Replies: 0
    Last Post: April 13th, 2009, 09:29 PM
  2. Replies: 0
    Last Post: April 3rd, 2009, 08:39 PM
  3. Your home built bench
    By Kaos in forum General
    Replies: 15
    Last Post: October 29th, 2008, 08:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •