Results 1 to 10 of 13
Thread: .458 Teaser Update with Pics
-
February 17th, 2017, 12:27 PM #1
.458 Teaser Update More Pics
Just to let you guys know who follow us and use our bullets we have started the process to get our new .458 Molds on order. For our first test run we are making a 405 grain round nose flat point with no lube grooves for our coated bullet process. We put the order in today for a custom mold to be cut. I will keep you guys posted on the process.
Last edited by DucatiRon; January 1st, 2019 at 11:35 PM.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
February 27th, 2017, 07:57 PM #2
Re: .458 Teaser Update #1
Just to give you guys an update. After talking with a few customers we are going to go with a 300 grain bullet. Mold designs were approved today. This should be a good cross over bullet for 45/70 and 458 Socom. Will update again when I get the first trial run mold in my hand. Probly 3-4 weeks before I get the mold.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
February 27th, 2017, 09:03 PM #3
Re: .458 Teaser Update #1
Sweet
45/70 can Form 2 might have to be filed earlier than I was planning.HGW, llc ~ Title 1 & NFA sales/manufacturing ~ Transfers - Title 1 $20 - NFA $50
-
March 4th, 2017, 02:49 PM #4
Re: .458 Teaser Update #1
Sent the check in for the mold. Time frame is 3 weeks to have it in my hands.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
March 4th, 2017, 11:20 PM #5Super Member
- Join Date
- Jan 2013
- Location
-
Milford,
Pennsylvania
(Pike County) - Posts
- 746
- Rep Power
- 1805171
Re: .458 Teaser Update #1
I have Rainier 405gr rnfp for my socom and they are a bit finicky. Now if you do some 500gr rn I'd be interested.
-
April 2nd, 2017, 11:54 AM #6
Re: .458 Teaser Update #1
Well the first prototype mold came in. Hand casted a few hundred and coated them up. Off to some select customers for a trial run. The coating did not come out as smooth as I would have liked but it is a small batch compared to my normal run so I have to live with it for testing purposes.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
December 6th, 2017, 10:31 AM #7
Re: .458 Teaser Update #1
Any updates on these?
I need another (too many) winter projectHGW, llc ~ Title 1 & NFA sales/manufacturing ~ Transfers - Title 1 $20 - NFA $50
-
December 6th, 2017, 12:43 PM #8
Re: .458 Teaser Update #1
We shelved it for a while. The first mold we cut was terrible.
Then we went onto 147 grn 9mm subsonics.
Now it looks like we are comming back around to having another mold cut first of the year.www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
December 6th, 2017, 01:02 PM #9
Re: .458 Teaser Update #1
And now I'm starting to Cerakote. That also took up some of my time.
www.Steelvalleycasting.com is your new home for coated bullets and custom ammo.
-
December 6th, 2017, 01:33 PM #10
Re: .458 Teaser Update #1
thanks for the update Ron
HGW, llc ~ Title 1 & NFA sales/manufacturing ~ Transfers - Title 1 $20 - NFA $50
Similar Threads
-
teaser email from Remington
By CL3 in forum RiflesReplies: 30Last Post: January 7th, 2013, 01:50 PM -
Mind Teaser: Permits issued to Canadian citizen with Canadian carry permit?
By danp in forum GeneralReplies: 5Last Post: March 27th, 2007, 03:48 PM
Bookmarks