Results 1 to 10 of 24
-
February 2nd, 2017, 09:01 PM #1Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Project AR-AK a marriage of east and west
just completed my 7.62x39 ar-15 build and I figured I'd share some photos of the build. This was my first complete build and honestly, I don't know why I didn't do it sooner. No more spending money to have someone else build a rifle...
Completed lower. Walked my wife through on how to build it, surprisingly enough she thought it was simple, and wanted to build more. Minus the bolt catch because she lost a few parts. Still waiting on delivery of that.
Parts list:
Stag arms blemish lower
Aero precision blemish upper
Palmetto State armory build kit
Magpul moe stock
Magpul moe grip
Magpul buis
ARD 7.62x39 barrel
Black rifle arms 7.62x39 bolt & enhanced firing pin
Odinworks low profile clamp on adjustable gas block
Odinworks 12.5 inch hand guard
Lantac dragon 7.62 muzzle break
C products 30 round "standard" capacity magazine
C products 10th round magazine.
The build was very easy, only hiccup was shortening the dust cover rod to allow the two piece barrel nut to index properly.
-
February 21st, 2017, 12:29 AM #2
Re: Project AR-AK a marriage of east and west
Damn. Just noticed this.
Cool! I'm planning to put one together by the summer.
I have the lower already - I just need an upper.
Have you shot it yet?
I can't get used to the look of those 30 rd mags.
That extreme curve and extra length just look so odd.
C-Products makes a 28 rd mag that's a bit shorter and I'll probably try those out.I called to check my ZIP CODE!....DY-NO-MITE!!!
-
February 21st, 2017, 12:06 PM #3Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: Project AR-AK a marriage of east and west
My wife and I shot 120 rounds through it. A mixture of tula hollow point rounds, and Winchester fmj. Dialed in the gas block to ensure proper bolt lock back. Had a minor issue with the first three rounds where the bolt would stick, but after hand cycling a few times, it ran great. I'll post a video of my wife shooting. Brass is ejecting around the 4 o clock position
-
February 21st, 2017, 12:19 PM #4
Re: Project AR-AK a marriage of east and west
Adjustable gas block - I'll probably use the same if I build.
I haven't yet decided if I'll build to suit my preferences or just buy a complete upper.
My lower has an "A2 style" look to it, so I may just stick with a basic overall look and use an upper with A2 front sight and add a carry handle, and be done with it.I called to check my ZIP CODE!....DY-NO-MITE!!!
-
February 21st, 2017, 12:26 PM #5Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: Project AR-AK a marriage of east and west
In my minimal opinion, an adj gas block is necessary for a non standard round. A standard h buffer will do just fine, no need to buy multiple buffer weights. Open gas block to cycle the cheap tula, and it'll cycle anything.
Personally, I would recommend building yourself, it's a fun process and you'll be able to buy exactly what you want, and you know that all parts are up to your standards, and not a company that wants to Make a profit.
-
February 21st, 2017, 12:37 PM #6
Re: Project AR-AK a marriage of east and west
If the manufacturer did their homework and sized the gas port right you don't need an adjustable gas block.(they can tell you what buffer their barrel needs) The thing is a lot of manufacturers don't do the R&D so the consumer has to do it.
-
February 21st, 2017, 01:20 PM #7
Re: Project AR-AK a marriage of east and west
I'm debating the Radical Firearms upper, but I know deep down that you are right.
I wanted to keep this "inexpensive" and that's easily accomplished with the Radical upper.
EDIT:
One of my concerns was "appearance". I know that function should be priority, but if I'm spending my hard-earned money, I don't want it to look like ass.
I'm using a GWACS Armory CAV15 "one piece" lower and I thought the only thing that would look right is a basic AR15 setup.
Then I found some other pics and I think I like it with the right free float hand guard.
ALG Defense is good and affordable and looks great on this rifle that uses the same lower/stock I have...
Building my own would allow me to do a 14.5" barrel with welded muzzle device.
Ugh. Why do I click these threads. They always end up costing me money I don't have!I called to check my ZIP CODE!....DY-NO-MITE!!!
-
February 21st, 2017, 02:19 PM #8Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: Project AR-AK a marriage of east and west
I currently have a radical firearms 458 socom upper, and while it is ok for general plinking, I wouldn't trust their build with my life. The reason why their stuff is so cheap is they cut corners. There's lots of threads regarding their build quality.
If you have any questions regarding my build, please feel free to pm me. I'd be happy to help, and if your near the tobyhanna sgl range we can meet up so you can check it outLast edited by SIGFAN86; February 21st, 2017 at 02:25 PM.
-
February 21st, 2017, 02:24 PM #9Senior Member
- Join Date
- Mar 2016
- Location
-
Eastern,
Pennsylvania
- Posts
- 475
- Rep Power
- 15469300
Re: Project AR-AK a marriage of east and west
My concern with 7.62x39 is the large quality differences in ammo, manufacturers will claim 100% reliability with brass cased ammo from xyz manufacturer, but then you might have issues with steel. And most people choose the ak round for it's cheap steel ammo costs. It's up to the end user to decide if a $100 adjustable gas block is worth the investment.
-
February 21st, 2017, 03:03 PM #10
Re: Project AR-AK a marriage of east and west
Usually the problem with 7.62X39 steel cased in ARs is primer ignition issues. Next is magazine issues. I've ran into the hard primers in my ARs before with certain steel cased ammo.
Similar Threads
-
Any "Gararand-smiths" in West PA/East Ohio areas?
By nfafan in forum GunsmithingReplies: 4Last Post: December 17th, 2011, 10:51 AM -
west oc- east oc
By nailer in forum GeneralReplies: 25Last Post: July 12th, 2009, 12:20 AM -
Man, sex & marriage
By knight0334 in forum GeneralReplies: 1Last Post: June 17th, 2009, 05:30 PM -
North, East, South and West
By P95Carry in forum GeneralReplies: 3Last Post: December 20th, 2006, 02:49 PM
Bookmarks