Results 1 to 10 of 13
Thread: Need help with muzzle brake
-
March 13th, 2016, 12:45 PM #1
Need help with muzzle brake
I have a pinned muzzle brake that needs to be drilled out on my ar15 upper.
If anybody can do it (I tried but my bits dont even scratch the surface) I will gladly pay you for your time.
Let me know.
Bogey.
-
March 13th, 2016, 12:49 PM #2Grand Member
- Join Date
- Jan 2012
- Location
-
Harrisburg,
Pennsylvania
- Posts
- 2,864
- Rep Power
- 21474851
Re: Need help with muzzle brake
Where are you located? Is it a roll pin?
-
March 13th, 2016, 01:16 PM #3
-
March 13th, 2016, 01:20 PM #4
Re: Need help with muzzle brake
Heres a pic
-
March 13th, 2016, 01:30 PM #5
-
March 13th, 2016, 01:38 PM #6
Re: Need help with muzzle brake
Last edited by bogey1; March 13th, 2016 at 01:42 PM.
-
March 13th, 2016, 01:44 PM #7Super Member
- Join Date
- May 2011
- Location
-
Southampton,
Pennsylvania
(Bucks County) - Posts
- 577
- Rep Power
- 21474849
-
March 13th, 2016, 01:46 PM #8
-
March 13th, 2016, 01:58 PM #9
Re: Need help with muzzle brake
They weld the pin in and then grind it. Use a small file and make the "pin" flat. Center punch it. Use cutting fluid. Be cautious with the pressure not to bend the drill or snap it. You can drill full size on something that small. It's hard because the weld cooled so fast because it's so small. Like dunking red hot steel in water. Just make sure you are drilling straight and the drill isn't walking off the center.
-
March 13th, 2016, 02:00 PM #10
Re: Need help with muzzle brake
Buy several bits, bro.
George,
So many guns, so little money.
Similar Threads
-
M44 muzzle brake
By SigSauer226 in forum RiflesReplies: 9Last Post: March 29th, 2013, 09:24 PM -
Ar15 muzzle brake
By mickey01023 in forum GeneralReplies: 7Last Post: January 23rd, 2012, 11:09 PM -
Muzzle Brake
By pistoffjstr in forum GeneralReplies: 11Last Post: October 2nd, 2008, 06:24 PM -
muzzle brake
By sparkz in forum GeneralReplies: 4Last Post: May 27th, 2008, 06:33 AM -
AK Muzzle brake
By Justin in forum GeneralReplies: 3Last Post: May 16th, 2007, 09:47 PM
Bookmarks