Results 1 to 5 of 5
Thread: Village Arms - Gunsmith Work
-
June 4th, 2015, 06:56 PM #1Senior Member
- Join Date
- May 2011
- Location
-
Chester County,
Pennsylvania
(Chester County) - Posts
- 262
- Rep Power
- 77320
Village Arms - Gunsmith Work
I recently acquired a Remington 700 that was a home gunsmithing project gone bad. The previous owner had broken off a tap in the action while trying to open up the holes for larger screws for a scope mount. Since this was beyond what I was capable of fixing at home, I took the rifle and mount to Village arms to have them sort everything out. The staff there was very polite and the process of taking in the project was easy.
Less than a week later they returned my rifle in less than the time estimated. The work that they performed was top notch and very reasonably priced.
I also took a look at their firearms while I was there and they have expanded their selection since the last time I stopped in about a year back.
If you're looking to have some work done to your guns and you're in the area, I would highly recommend Village Arms.
-
June 29th, 2018, 05:09 PM #2
Re: Village Arms - Gunsmith Work
+1 on the guys at Village Arms. I dealt with Matt and Justin and was very impressed. I found both to be very knowledgeable, friendly and of the highest integrity. I had some work done to a very valuable item in my collection and after talking to them on my first visit I felt very comfortable letting them do the job. They did not disappoint. Their prices are reasonable as well. Do not hesitate to give them a try.
Village Arms
868 PA-41
Gap, PA 17527
Phone: (717) 442-9538Last edited by SPEEDGUNNER; June 30th, 2018 at 06:19 AM.
-
June 29th, 2018, 06:22 PM #3
Re: Village Arms - Gunsmith Work
Village Arms in Gap, Pa? Rts. 41 & 30?
Resistance to tyrants is obedience to God.
-
July 1st, 2018, 10:25 PM #4Grand Member
- Join Date
- Dec 2011
- Location
-
Where the amish roam,
Pennsylvania
(Lancaster County) - Posts
- 2,812
- Rep Power
- 21474851
-
May 28th, 2019, 02:11 PM #5Junior Member
- Join Date
- May 2019
- Location
-
Nottingham,
Pennsylvania
(Chester County) - Posts
- 1
- Rep Power
- 0
Re: Village Arms - Gunsmith Work
Stopped off to have my 300 Black out barrel dimpled.Dropped off at 10:00 am. Picked back up at 12:00 lunch time. 2 dimples & Gas System Alignment.Staff was courteous and professional!! Matt A++!!
Similar Threads
-
The Village Arms, Gap PA
By 300plus in forum ShopsReplies: 17Last Post: September 14th, 2016, 02:50 PM -
Village Arms gunsmithing
By Hammerdown in forum GunsmithingReplies: 0Last Post: February 17th, 2013, 12:50 AM -
Village Arms - Gap
By Skytow in forum ShopsReplies: 1Last Post: January 15th, 2011, 02:06 PM -
The Village Arms Gap, PA
By WSM in forum ShopsReplies: 3Last Post: September 30th, 2010, 07:26 PM -
Village Arms - Gap,PA
By dgm0967 in forum GeneralReplies: 0Last Post: December 11th, 2009, 11:38 PM
Bookmarks