Need a gunsmith SE PA to weld on an AK

**joelad** · July 16th, 2014, 08:35 PM

I have a Norinco MAK-90 that was a blocked under folder. It came with a thumb hole stock. When I took the stock off, the bottom of the trunion was milled away for the stock to fit. It also had a double hole stock tang welded on.

I'm looking for someone capable of welding up the hole. I can cut off and dress the tang area. Any suggestions?

A pic of what it looks like.

**JoshIronshaft** · July 17th, 2014, 12:00 PM

If you were on my side of the state I could help you. Man that is a lot of TIG welding though.

**Takem** · July 17th, 2014, 05:08 PM

I'd call some weld shops. Maybe someone that does custom exhaust or something similar. It can be done but it will be time consuming.

**wellcraft** · July 18th, 2014, 09:57 AM

john robinson might be able to do it. he's the gunsmith at claytons in horsham pa just outside of philadelphia.

**Svickstc** · July 18th, 2014, 09:58 AM

Originally Posted by Takem

I'd call some weld shops. Maybe someone that does custom exhaust or something similar. It can be done but it will be time consuming.

can just a regular fab shop work on an reciever like that without and FFL?

INAL but for some reason im going to say thats a no go, unless you're standing there watching and it never "leaves" your possession for "gunsmithing"