Results 1 to 10 of 10
Thread: Need a little help, whatsit?
-
April 6th, 2014, 03:44 PM #1Junior Member
- Join Date
- Nov 2009
- Location
-
South Park,
Pennsylvania
(Allegheny County) - Posts
- 4
- Rep Power
- 0
Need a little help, whatsit?
I was going through a box and came accross these two screws.
I ASSUME, yep I do know what that means, that they were some sort of sight adjustment screws.
I used my calipier to get these measurements. Overall length is 1.33", the first step down below the knurling measures .413
the next step meas. .311 and the small shaft just before the threads measures .137
Any help would be appreciated.
[IMG][/IMG]
Thanks, TomLast edited by AJ100; April 6th, 2014 at 03:47 PM.
-
April 6th, 2014, 10:42 PM #2
-
April 6th, 2014, 11:10 PM #3Senior Member
- Join Date
- Feb 2010
- Location
-
Downingtown
(Chester County) - Posts
- 281
- Rep Power
- 26278
Re: Need a little help, whatsit?
I agree with Amnesia. Those look like screws for the back of a desktop computer case.
-
April 7th, 2014, 07:55 AM #4
-
April 7th, 2014, 09:48 AM #5
Re: Need a little help, whatsit?
Could be the mounting screws fo scope rings (where the rings clamp to the mount).
Ron USAF Ret E-8 FFL01/SOT3 NRA Benefactor Member
-
April 7th, 2014, 10:01 AM #6Banned
- Join Date
- Dec 2012
- Location
-
The land o' cotton, old times there are not forgotten
- Posts
- 3,536
- Rep Power
- 0
-
April 7th, 2014, 10:11 AM #7
Re: Need a little help, whatsit?
They look French. Maybe the locking screws for a calipier?
-
April 7th, 2014, 07:10 PM #8Member
- Join Date
- Aug 2012
- Location
-
east stroudsburg,
Pennsylvania
(Monroe County) - Posts
- 82
- Rep Power
- 5522
Re: Need a little help, whatsit?
they also look like screws for redfield globe front sights.
manharts gunsmithing/machine shop/dirt bike repair
-
April 7th, 2014, 08:20 PM #9Junior Member
- Join Date
- Nov 2009
- Location
-
South Park,
Pennsylvania
(Allegheny County) - Posts
- 4
- Rep Power
- 0
Re: Need a little help, whatsit?
Thanks guys. They were in a large box along with sights, rings, a Model 512 peep sight and misc. firearm screws and parts.
BTW, the guess about them being screws from a computer? The guy that owned all this stuff, there were four SUV loads I brought home, wouldn't know a computer from a toaster.
I knew they were gun related, just didn't know what.
Thanks, Tom
-
April 12th, 2014, 11:48 AM #10
Re: Need a little help, whatsit?
They look like screws from sling mounts or swivels.
Similar Threads
-
Blackhawk CQC whatsit
By toml in forum GeneralReplies: 5Last Post: May 24th, 2007, 10:23 PM
Bookmarks