Results 1 to 10 of 11
Thread: 5.56mm Suppressor Question.
-
March 20th, 2013, 04:49 PM #1
5.56mm Suppressor Question.
I am in the market to buy my first suppressor and have a question for those that own one.
I was wondering if I could use a 5,56mm suppressor for my M4 on a .22 caliber rifle?
I know it wouldn't work the other way around, but I figure a heavier duty 5,56mm AR/M16 suppressor would be fine on a .22
Thoughts?"One must be a fox to recognize traps, and a lion to frighten wolves” ~ Machiavelli
-
March 20th, 2013, 06:39 PM #2Grand Member
- Join Date
- Apr 2009
- Location
-
Deactivated
- Posts
- 1,807
- Rep Power
- 6383392
Re: 5.56mm Suppressor Question.
There is a class 3 forum section of the forum.
[account deactivated]
-
March 20th, 2013, 08:13 PM #3
Re: 5.56mm Suppressor Question.
You can use it, but the concern is the lead build up. If you are contemplating this setup, I would highly recommend a disassemblable suppressor, so that you can clean it. Otherwise, when it leads up, you won't be happy with the suppression.
Joshua Prince, Esq. - Firearms Industry Consulting Group - www.PaFirearmsLawyer.com
-
March 20th, 2013, 08:20 PM #4
Re: 5.56mm Suppressor Question.
^what he said.
A can that sees 22 use should to be taken apart and cleaned because the lead fowling can literally pack the can and decrease its effectiveness.In America arms are free merchandise such that anyone who has the capital may make their houses into armories and their gardens into parks of artillery. - Ira Allen, 1796
-
March 26th, 2013, 12:53 AM #5
Re: 5.56mm Suppressor Question.
Thanks guys!
Im going to stat shopping around for one."One must be a fox to recognize traps, and a lion to frighten wolves” ~ Machiavelli
-
March 26th, 2013, 10:22 AM #6Active Member
- Join Date
- Apr 2011
- Location
-
Pittsburgh,
Pennsylvania
(Allegheny County) - Posts
- 164
- Rep Power
- 1091
-
March 26th, 2013, 10:44 AM #7
-
March 27th, 2013, 11:38 PM #8
-
March 28th, 2013, 07:04 AM #9
Re: 5.56mm Suppressor Question.
silencershop.com
Good prices, knowledgable.Socialist Liberals Suck!
-
March 28th, 2013, 07:09 AM #10Senior Member
- Join Date
- Oct 2006
- Location
-
N/A
- Posts
- 312
- Rep Power
- 498419
Similar Threads
-
9mm FPS Suppressor Question
By NoMoreOp4 in forum NFA/Class 3/Title IIReplies: 7Last Post: March 2nd, 2012, 09:59 PM -
Suppressor legality question
By FCRPhila in forum NFA/Class 3/Title IIReplies: 10Last Post: December 5th, 2010, 10:55 AM -
General suppressor question
By Mity2 in forum NFA/Class 3/Title IIReplies: 12Last Post: August 22nd, 2010, 05:53 PM -
Suppressor question
By Franky4Fingers in forum NFA/Class 3/Title IIReplies: 6Last Post: April 12th, 2010, 08:21 PM -
suppressor question
By Mity2 in forum GeneralReplies: 10Last Post: December 26th, 2008, 09:56 AM
Bookmarks