Results 1 to 6 of 6
-
February 15th, 2013, 07:06 AM #1Junior Member
- Join Date
- Dec 2009
- Location
-
SE PA,
Pennsylvania
(Montgomery County) - Posts
- 12
- Rep Power
- 0
Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
Well, I sat down to give my Winchester Model 24 a good post-hunting season cleaning. This time I got a little over zealous with my cleaning regimen and removed the screw that I should have.
Can anyone provide me with disassembly/re-assembly instructions for a Winchester model 24? I searched the net and I couldn't find a decent resource. I also looked on Amazon and other book sellers for a reassembly book but none of the compilation books include directions for this model.
-
February 15th, 2013, 04:23 PM #2Active Member
- Join Date
- Aug 2009
- Location
-
Coatesville,
Pennsylvania
(Chester County) - Posts
- 102
- Rep Power
- 316
Re: Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
Try Numrich Gun Parts. They have Schematics on line that you can look at. Hope this helps.
I will fear no man or beast, because my 45 is on my side, at least!
-
March 2nd, 2013, 03:10 PM #3Junior Member
- Join Date
- Dec 2009
- Location
-
SE PA,
Pennsylvania
(Montgomery County) - Posts
- 12
- Rep Power
- 0
Re: Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
Thanks for all the PMs. I found a link that was quite helpful and made it a sinch to reassemble.
If anyone has the same problem in the future please check out:
http://forums.gunboards.com/showthre...sassembly-Tips
-
March 2nd, 2013, 04:11 PM #4
Re: Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
Thanks, have one and bookmarked that site in case I ever need it.
It ain't what they call you, it's what you answer to.
-
March 2nd, 2013, 04:17 PM #5Junior Member
- Join Date
- Dec 2009
- Location
-
SE PA,
Pennsylvania
(Montgomery County) - Posts
- 12
- Rep Power
- 0
Re: Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
FYI: You have to join the forum to see the photos.
-
April 4th, 2021, 04:58 PM #6Super Member
- Join Date
- Jul 2008
- Location
-
Springtown,
Pennsylvania
(Bucks County) - Posts
- 781
- Rep Power
- 3050561
Re: Winchester 24 Double Shotgun Disassembly (Re-Assembly) Instructions
Greetings,
Thanks much for the info and link! I also removed the wrong screw out of sequence! Much gratitude.
Regards, Jim
Similar Threads
-
Winchester WildCat 22LR Assembly
By kasio69 in forum GeneralReplies: 2Last Post: February 25th, 2009, 12:23 PM -
Winchester Model 69 Bolt Assembly
By stwtorpedo in forum GeneralReplies: 4Last Post: May 14th, 2007, 12:49 AM
Bookmarks