Results 1 to 10 of 11
-
January 19th, 2013, 04:15 PM #1
Can't load all rounds into magazine.
One of my glock 23 magazines is a 13 rd mag, but I can't get more than 10 rounds in it. I took the floor plate off pulled it all apart. Is the "wedge" shaped piece on the bottom of the spring what prevents the last 3 rounds from fitting?
-
January 19th, 2013, 06:35 PM #2
-
January 19th, 2013, 06:36 PM #3
Re: Can't load all rounds into magazine.
I haven't disassembled a Glock magazine, but do your other 13-rounders have the same wedge? If you don't wanna take another one apart, check a youtube video of a mag disassembly and compare.
-
January 19th, 2013, 07:58 PM #4Grand Member
- Join Date
- Jan 2010
- Location
-
West Chester,
Pennsylvania
(Chester County) - Posts
- 1,431
- Rep Power
- 10176462
Re: Can't load all rounds into magazine.
That triangle thing is not normal for glock mags that I have seen.
Hoplophobia is funny
-
January 19th, 2013, 10:01 PM #5
Re: Can't load all rounds into magazine.
I suggest removing the wedge and reassembling the magazine and just test it to see if it fits all 13 rounds. Then load it up with snap caps and try cycling the weapon.
If you don't have enough snap caps, you can also load it halfway with live rounds and top it off with snap caps... Just don't cycle past the snap caps.Last edited by snakeman21; January 19th, 2013 at 10:04 PM.
Everyone should have an AK-47
-
January 19th, 2013, 10:05 PM #6
Re: Can't load all rounds into magazine.
I just checked another mag and it doesn't have it. I loaded te other mg and it now holds 13. Im probably going shooting next weekend so I'll be sure to test it then.
-
January 19th, 2013, 10:15 PM #7Grand Member
- Join Date
- Nov 2009
- Location
-
Washington,
Pennsylvania
(Washington County) - Age
- 39
- Posts
- 1,016
- Rep Power
- 304000
-
January 19th, 2013, 10:22 PM #8Grand Member
- Join Date
- Jan 2007
- Location
-
OUT TO LUNCH
- Posts
- 4,574
- Rep Power
- 21474858
Re: Can't load all rounds into magazine.
You somehow ended up with one of these....
http://www.midwayusa.com/product/883...-polymer-black
You need to buy one of these or get the plus 2 base pad which is was designed to work with.
http://www.midwayusa.com/product/411...-polymer-black
Jules
-
January 19th, 2013, 10:36 PM #9
-
January 19th, 2013, 11:35 PM #10
Similar Threads
-
Want to buy a Lee Pro 1000 to load rifle and handgun rounds
By .45Kimber1911 in forum Ammunition & ReloadingReplies: 8Last Post: May 20th, 2012, 12:18 AM -
Tokarev does not load or eject rounds. Hammer group rails too tight?
By Zet70 in forum PistolsReplies: 0Last Post: February 23rd, 2011, 11:53 PM -
How do you load +P rounds ?
By mypobox in forum Ammunition & ReloadingReplies: 23Last Post: April 23rd, 2010, 06:59 PM
Bookmarks