Spare Parts?

**Smartguns** · January 7th, 2013, 09:47 AM

Okay, so lest I injure myself because i'm a rookie I thought I'd ask you all a question regarding a recent LPK (from PSA) installation I did that resulted in a spare 'keeper/detint' and spring.

I Built this...

And I ended up with this left over...

Everything seems to work okay, including the trigger but again this is my first build.

Any Ideas/Advice?

Thanks

**tonyfac** · January 7th, 2013, 11:00 AM

Check your bolt hold open, should have spring tention, remove mag and test.

**BB MBD** · January 7th, 2013, 11:16 AM

Yep. Bolt Catch detent and spring.

**Gun** · January 7th, 2013, 11:32 AM

Not uncommon. Was missing the pins for the FCG out of a Spikes Tactical LPK, ordered from Primary Arms. P.A. sent the pins posthaste.

**Smartguns** · January 7th, 2013, 11:47 AM

Originally Posted by BB MBD

Yep. Bolt Catch detent and spring.

That's it...thank you Sir

**Smartguns** · January 7th, 2013, 11:49 AM

Originally Posted by Gun

Not uncommon. Was missing the pins for the FCG out of a Spikes Tactical LPK, ordered from Primary Arms. P.A. sent the pins posthaste.

Oh no, lets be clear...PSA didn't short me these parts...I'm just so much of a rookie that I didn't know where they were meant to go...

...the video I used to learn this, didn't show that step too well...so ya learn the hard way...it's part of learning...

Thank you all for your help here!

**Smartguns** · January 7th, 2013, 12:25 PM

Originally Posted by Gun

Not uncommon. Was missing the pins for the FCG out of a Spikes Tactical LPK, ordered from Primary Arms. P.A. sent the pins posthaste.

Oh no, lets be clear...PSA didn't short me these parts...I'm just so much of a rookie that I didn't know where they were meant to go...

...the video I used to learn this, didn't show that step too well...so ya learn the hard way...it's part of learning...

Thank you all for your help here!

**solrac7** · January 7th, 2013, 12:35 PM

Congratulations on your 1st build ! Learning is always a good thing too! Now be proud of it and shoot it.

Kudos, Cb

**Gun** · January 7th, 2013, 12:45 PM

Originally Posted by Smartguns

Oh no, lets be clear...PSA didn't short me these parts...

That was clear in your opening post. My post reflected the opposite. Forget to include the phrase 'Once, at AR camp ...'. Not uncommon for either to happen.

Originally Posted by Smartguns

And I ended up with this left over...

BTW, if it seems to take too long for your post to appear, after hitting the 'Submit Reply' button, don't hit the button again. Go back to the Forum index, your post will appear.