Share Deals on Guns Ammo Accessories Here

**Walleye Hunter** · February 16th, 2021, 08:33 PM

Originally Posted by esh21167

These are manufactured by MKE,who made the Zenith guns. Zenith was the importer. They had a falling out with MKE, so apparently Century is now importing. Maybe good, but if there are issues, I would be concerned with Century's ability to fix them.
Yes, they are selling for the MSRP of an HK SP5, but you won't find an SP5 for probablyunder $3500.

I didn't know that Zenith and MKE had a falling out but I was aware that there were some quality control issues with the latest batch to come in a year or so ago. And those prices are sky high all the way around.

**HanzMcFeely** · February 16th, 2021, 09:00 PM

Originally Posted by God's Country

LOL
Don't miss out on this deal

https://www.midwayusa.com/product/1023355033
Attachment 142780

Well damn, I better sell a kidney...maybe a testicle too while I’m at it

If anyone stumbles across some extra power hammer springs that’ll fit LR308, keep me in mind. A heavier hammer also would be nice...

Or a good deal on a drop in trigger...I’m chasing down light strikes on the new rifle. Have a couple titanium firing pins on order.

**ViperHummel** · February 16th, 2021, 09:13 PM

Originally Posted by Woodwanderer

Well damn, I better sell a kidney...maybe a testicle too while I*m at it

If anyone stumbles across some extra power hammer springs that*ll fit LR308, keep me in mind. A heavier hammer also would be nice...

Or a good deal on a drop in trigger...I*m chasing down light strikes on the new rifle. Have a couple titanium firing pins on order.

For a .308 AR, that shouldn*t be necessary unless maybe trying to use steel cased, and even then usually it*s only the com bloc calibers that have tough primers. I would check your firing pin protrusion first, which could be a FP or even bolt face problem.

**HanzMcFeely** · February 16th, 2021, 09:19 PM

Originally Posted by ViperHummel

For a .308 AR, that shouldn*t be necessary unless maybe trying to use steel cased, and even then usually it*s only the com bloc calibers that have tough primers. I would check your firing pin protrusion first, which could be a FP or even bolt face problem.

The LPK is of unknown origin: it came with the build kit. The bolt could also be a bit dry and not allowing the FP to move freely...im going to tear it down and deep clea /ultrasonic clean it.

It’s mainly doing it with surplus ammo (harder primers).

**chp1911** · February 16th, 2021, 10:08 PM

Originally Posted by Woodwanderer

The LPK is of unknown origin: it came with the build kit. The bolt could also be a bit dry and not allowing the FP to move freely...im going to tear it down and deep clea /ultrasonic clean it.

It*s mainly doing it with surplus ammo (harder primers).

Look up School of the American Rifle on You tube. I think that you are over thinking SOME of your issues. There are several simple tests that you can try with out any special tooling/jigs to see that your parts meet the Mil- spec requirements.

**GOYABEAN** · February 16th, 2021, 10:41 PM

Aim multiple calibers 9MM , 8MM , 10MM , 6.5x55 , 7.63 , 7.65 , 12G 3 1/2

https://aimsurplus.com/ammo/

**Fortytwo** · February 16th, 2021, 11:10 PM

Originally Posted by GOYABEAN

Aim multiple calibers 9MM , 8MM , 10MM , 6.5x55 , 7.63 , 7.65 , 12G 3 1/2

https://aimsurplus.com/ammo/

Looks like Mauser ammo are still at pre-panic prices.

**ViperHummel** · February 17th, 2021, 12:25 AM

Originally Posted by chp1911

Look up School of the American Rifle on You tube. I think that you are over thinking SOME of your issues. There are several simple tests that you can try with out any special tooling/jigs to see that your parts meet the Mil- spec requirements.

I second and third SOTAR. Chad is a guru with the AR. A shame Facebook nuked his group. So much knowledge shared was tanked over night.

**stangkid14** · February 17th, 2021, 08:41 AM

Originally Posted by esh21167

These are manufactured by MKE,who made the Zenith guns. Zenith was the importer. They had a falling out with MKE, so apparently Century is now importing. Maybe good, but if there are issues, I would be concerned with Century's ability to fix them.
Yes, they are selling for the MSRP of an HK SP5, but you won't find an SP5 for probablyunder $3500.

what do you think of the ptr 9mm pistol? I am thinking about buying one they are about 1800 right now

**zachomega** · February 17th, 2021, 11:23 AM

Originally Posted by Woodwanderer

Well damn, I better sell a kidney...maybe a testicle too while I’m at it

If anyone stumbles across some extra power hammer springs that’ll fit LR308, keep me in mind. A heavier hammer also would be nice...

Or a good deal on a drop in trigger...I’m chasing down light strikes on the new rifle. Have a couple titanium firing pins on order.

Who is buying testicles? Asking for a friend.

-Zach